Re: 8051 IP core with JTAG debugger for FPGA?

"Pszemol" <Pszemol@xxxxxxxxxx> schrieb im Newsbeitrag
news:dtk2h7.b44.0@xxxxxxxxxxxxxxxxx
Anybody here with experiences with syntetising some 8051 core
with JTAG debugger in FPGA ? What core can you recommend ?

there is no standard JTAG debug for 8051 core,
quickcores had some 8051 ipcore and jtag debug interface
but quickcores is dead, so you cant obtain that source any more

I bet any other available 8051 does not include jtag debugger
and even it would there is no debug software that supports that
so you would end up writing the debugger and jtag unit yourself
anyway

easiest is to take some 8051 core and just connect chipscope
ILA's onto the bussses, that sufficent for many cases

Antti


.

Relevant Pages

  • Re: 8051 IP core with JTAG debugger for FPGA?
    ... with JTAG debugger in FPGA? ... What core can you recommend? ... quickcores had some 8051 ipcore and jtag debug interface ... I bet any other available 8051 does not include jtag debugger ...
    (comp.arch.fpga)
  • Re: 8051 IP core with JTAG debugger for FPGA?
    ... quickcores has become SiliconLaude -- www.siliconlaude.com -- and interesting 8051 cores with real-time JTAG debug are available. ... What core can you recommend? ... I bet any other available 8051 does not include jtag debugger ...
    (comp.arch.fpga)
  • Re: Xilinx 3E design programs fine with 500E but fails with 250E
    ... --> I think it tries 3 times to load from spi and then gives up. ...  - Change the JTAG clock rate used by Impact to one of the slower ... Talking to the FPGA has always been fine - you can download projects ... this spi bridge core is unique to each device and each package. ...
    (comp.arch.fpga)
  • Re: more advice please
    ... As you are on Linux/GNU the usual way is to preprogram a flash chip with a bootloader (such as UBOOT) and start the system. ... a JTAG debugger will not help much when doing Linux application software here most developers seem to use code instrumentation and remote GDB via Ethernet. ... For Kernel development using a JTAG debugger is said to be helpful in some cases. ...
    (comp.os.linux.embedded)
  • Re: Use EzDSP board as emulator?
    ... I did a similar thing with an eval board from Motorola. ... contained a target evaluation system with a 56303 and surrounding ... peripherals and a 56002 with a serial port as a JTAG interface. ... to enable a real JTAG debugger to be attached to the target 56303. ...
    (comp.arch.embedded)