Re: Z10 BC DS8700 Storage issue
- From: scott.rowe@xxxxxxxxx (Scott Rowe)
- Date: 3 Dec 2010 06:39:40 -0800
The actual device numbers you assign in the IOCDS is irrelevant, what
matters is the CUADD and UNITADD keywords, how are they set?
On Fri, Dec 3, 2010 at 7:29 AM, SrinivasG <SRINIVASG@xxxxxxxxxxx> wrote:
Hi,
In the IOCDS , I have mentioned device address as (300,196) and (1100,196).
But the Storage engineer has formatted the devices starting from 2100
instead of 1100.
I think that should not be a problem. But I am not sure.
Also , is there a power up sequence. Like should the DS8K be powered up
before the Z10BC?
Regards,
Srinivas G
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@xxxxxxxxxxx] On
Behalf Of Paolo Cacciari
Sent: Friday, December 03, 2010 5:44 PM
To: IBM-MAIN@xxxxxxxxxxx
Subject: Re: Z10 BC DS8700 Storage issue
Srnivas,
double check DS8700 Channel Paths and be sure they're ONLINE...
If they are, check your IOCDS and verify that CHPs/CUs are assigned to
your LPAR (if you are IPLing one...).
Ciao.
_________________________________________________________________________
Paolo Cacciari
IBM Italia S.p.A.
Business Continuity and Resiliency Services, IBM Global Services - South
Region, EMEA
IBM Italia S.p.A.
Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI)
Cap. Soc. euro 384.506.359,00
C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153
Societą soggetta all?attivitą di direzione e coordinamento di
International Business Machines Corporation
(Salvo che sia diversamente indicato sopra / Unless stated otherwise
above)
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to listserv@xxxxxxxxxxx with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended
solely
for the use of the addressee(s). If you are not the intended recipient,
please
notify the sender by e-mail and delete the original message. Further, you
are not
to copy, disclose, or distribute this e-mail or its contents to any other
person and
any such actions are unlawful. This e-mail may contain viruses. Infosys has
taken
every reasonable precaution to minimize this risk, but is not liable for
any damage
you may sustain as a result of any virus in this e-mail. You should carry
out your
own virus checks before opening the e-mail or attachment. Infosys reserves
the
right to monitor and review the content of all messages sent to or from
this e-mail
address. Messages sent to or from this e-mail address may be stored on the
Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to listserv@xxxxxxxxxxx with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
CONFIDENTIALITY/EMAIL NOTICE: The material in this transmission contains
confidential and privileged information intended only for the addressee.
If you are not the intended recipient, please be advised that you have
received this material in error and that any forwarding, copying, printing,
distribution, use or disclosure of the material is strictly prohibited.
If you have received this material in error, please (i) do not read it,
(ii) reply to the sender that you received the message in error, and
(iii) erase or destroy the material. Emails are not secure and can be
intercepted, amended, lost or destroyed, or contain viruses. You are deemed
to have accepted these risks if you communicate with us by email. Thank you.
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to listserv@xxxxxxxxxxx with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
.
- References:
- Re: Z10 BC SNA Console
- From: Scott Rowe
- Re: Z10 BC SNA Console
- From: Shmuel Metz , Seymour J.
- Re: Z10 BC SNA Console
- From: Scott Rowe
- Re: Z10 BC DS8700 Storage issue
- From: Paolo Cacciari
- Re: Z10 BC SNA Console
- Prev by Date: TS7700 Physical volume info not being updated
- Next by Date: CFRM Coupling Facility Structure Size
- Previous by thread: Re: Z10 BC DS8700 Storage issue
- Next by thread: Re: Z10 BC SNA Console
- Index(es):
Relevant Pages
|
