Re: Why so few 37" sets
- From: Wes Newell <w.newell@xxxxxxxxxxxxxxx>
- Date: Fri, 7 Aug 2009 17:21:46 +0000 (UTC)
On Fri, 07 Aug 2009 13:51:57 +0000, Mike S. wrote:
Yes; unfortunately they all omit one measurement that I'd have to make
in person. The fit is so tight that the right edge of the TV chassis
would be obsured behind a ~1.5" "lip" of the entertainment center
enclosure. I'm pretty certain that this would match width of the black
bezel around the LCD screen; i.e. meaning that the edge of the LCD would
not be covered by the entertainment center enclosure. A quick
tape-measure look at an actual TV should do it; I've measured 32" and
42" sets and there seems to be room to spare.
I find most sites list the width of the set. My encloser said it would
take a 36" 4x3 set, but it wouldn't take a 37" 16x9 set that is 37" wide
and I had to modify it. Generally, the width will be no wider than the
screen size, and some or an inch or 2 narrower. I had no problem finding
dimensions for any set.
--
Want the ultimate in free OTA SD/HDTV Recorder? http://mythtv.org
My Tivo Experience http://wesnewell.no-ip.com/tivo.htm
Tivo HD/S3 compared http://wesnewell.no-ip.com/mythtivo.htm
AMD cpu help http://wesnewell.no-ip.com/cpu.php
.
- References:
- Why so few 37" sets
- From: Mike S.
- Re: Why so few 37" sets
- From: Mike S.
- Re: Why so few 37" sets
- From: cjdaytonjrnospam
- Re: Why so few 37" sets
- From: Mike S.
- Why so few 37" sets
- Prev by Date: Re: Why so few 37" sets
- Next by Date: Re: OTA quality vs cable vs dish
- Previous by thread: Re: Why so few 37" sets
- Next by thread: Re: Why so few 37" sets
- Index(es):
Relevant Pages
|
