Re: Insignia NS-DXA1 converter same as Zenith DTT900?

Wes Newell <w.newell@xxxxxxxxxxxxxxxxxx> wrote:

So in the end, the
one you get will work good if you connect it correctly with a proper
antenna, or it will work terrible, regardless of the brand. the thing you
should concern yourself with is does it have the optional features you
want/need. The Zenith has none.

So how well does that :"smart antenna" feature work?

Does it REALY help? Or just a minimal advantage?
.

Relevant Pages

  • Re: Two antennas and two power amps
    ... regardless of the element shapes. ... With the described "one transmitter feeding two antenna" system you have ... you have all the power from each amp going into the respective antenna. ... The relative phase of the two antenna currents will create the pattern ...
    (rec.radio.amateur.antenna)
  • Re: impedance tuned antenna
    ... At slow speeds, it doesn't matter much. ... horrible for any antenna. ... The builder doesn't really know what the VSWR ... of his antenna is without proper test equipment. ...
    (alt.internet.wireless)
  • Re: impedance tuned antenna
    ... At slow speeds, it doesn't matter much. ... horrible for any antenna. ... of his antenna is without proper test equipment. ... resulted in the minimum VSWR point being way off frequency. ...
    (alt.internet.wireless)
  • Re: Making FM Dipole Antenna
    ... Get some books on antenna design and start from there. ... The simplest antenna are a pair of wires cut to the proper length, ... I dont want to spend anything on this project, just use some of the odds and ends I got laying around, and plan to put this on a board and mount it outside with coax coming in the house. ... However, I got one of those outdoor converter devices for tv antennas that have 2 spade clips on the wires on one end, and a coax connector on the other. ...
    (sci.electronics.repair)
  • Re: Radio ignition noise.
    ... amplification at 1.2 Ghz, regardless of the position of the antenna on the ...
    (rec.aviation.homebuilt)