Re: Do you make your own coax cables or buy them?

In article <4m88s3ljld673p9cm00gup4btg71m5kotr@xxxxxxx>,
<me@xxxxxxxxxxx> wrote:

Just curious how many people buy raw coax and tools to
put connectors on them to make their own coax cable
runs?

Or do you just buy them-made with connectors on them
and use couplers if needing extra pre-?

I make my own connections from wall to device... so I can keep cables
to a minimum length. Not to prevent signal loss, but for neatness.
Bought good RG-6 compression fittings and tools.
.

Relevant Pages

  • Re: CPU Core Voltage Too Low -> Crash? - Important Addition
    ... but it's just four screws and unplug a few connectors to ... voltage across the board, whereas if it's only one voltage reading that's ... Starting from when I first bought this system 2 years ago, ... When my first reboot/crash occurred last month, it started the same way - ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: CPU Core Voltage Too Low -> Crash? - Important Addition
    ... but it's just four screws and unplug a few connectors to ... voltage across the board, whereas if it's only one voltage reading that's ... Starting from when I first bought this system 2 years ago, ... When my first reboot/crash occurred last month, it started the same way - ...
    (microsoft.public.windowsxp.general)
  • Re: Bally Kings of Steel (as2518-54)
    ... The guy I bought the machine from said he had it for 15 years. ... bought it he said the F3 fuse blows everytime he starts the machine. ... The family would play the game and get a free game to keep the credits ... i'll go home and checked the connectors and make sure they ...
    (rec.games.pinball)
  • SATA Controller to Backplane
    ... I've already posted once that I've bought this Proliant ML150 G3 server, ... hot-plug backplane is too short to reach the connectors. ... So I'm looking for an SATA cable from the backplane to 4x ...
    (comp.sys.hp.hardware)
  • Re: Tech: need help with troubleshooting on my WW
    ... I just bought a WhiteWater and had to disconnect the backbox, ... it and double checked my connectors. ...
    (rec.games.pinball)