Re: Third HDD Problem




"Christopher Muto" <muto@xxxxxxxxxxxxxxxx> wrote in message news:CM2dnVe8V5mVdFHXnZ2dnUVZ_s2dnZ2d@xxxxxxxxxxxxxxxx
"MJMIII" <mjmiii@xxxxxxxxxxxxxxxxx> wrote in message news:0eOdnf6T1ZBsK1HXnZ2dnUVZ_oKdnZ2d@xxxxxxxxxxxxxxx

"William R. Walsh" <wm_walsh@xxxxxxxxxxx> wrote in message news:f826bdbe-4e44-46f2-9c89-b1ccca78d3e9@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi!

XPS 630i
Just picked up another 1.5TB SATA drive. Installed it using the last
data connector and stealing the power connector from an extra
DVD burner. System doesn't see the drive.

First, as Christopher pointed out, make sure the drive is turned on in
the BIOS setup utility. It used to be that Dell systems would show the
new hard drive when the operating system had started up, but that it
would only work in PIO mode.

I know knothing about RAID and I suspect this may be
the problem. Anyone have a clue what I need to do?

If you don't know anything about RAID on this system, I doubt that it
is set up.

If it is, you'll need to add the drive to a "logical container" (or
similarly named object) with something like the Intel Matrix Storage
Manager.

Also, is there some kind of splitter made that I can attach to an
existing power cable to split it into 2?

Yes, such things do exist. I haven't seen any that do this with a SATA
power connector, but I have seen many that take the conventional four
pin Molex connector to two or more SATA connectors. You should be able
to get one for a few bucks at any decently stocked computer store. Or
they might even give you one if you ask nicely. Every few months, I
get a big bag of screws and *boxes* of various cables from one that I
frequent. They give the stuff to me instead of throwing it away.

William

Thanks William. Looks like RAID is set up on this...at least BIOS shows the RAID array, but I still haven't a clue how to work with it.

--


"Don't pick a fight with an old man.
If he is too old to fight, he'll just kill you."


your machine supports a raid configuration of the hard disk, but that does not mean it is in use.
if you did not request a raid configuration when you purchased the machine then raid is not in use.
drives marked as raid enabled does not mean that they are configured for use as a raid group.
read this section of the xps 630i owners manual to better understand the issues:
http://support.dell.com/support/edocs/systems/xps630i/en/OM/HTML/raid.htm#wp1105185
ps. you should have enough power conectors for all the drives that the system has a bay for. look under technical overview for a detailed image of the power supply and all of its power conenctors.
http://support.dell.com/support/edocs/systems/xps630i/en/SM/HTML/index.htm


Thanks Christopher!

--


"Don't pick a fight with an old man.
If he is too old to fight, he'll just kill you."

.



Relevant Pages

  • Re: Totaly toasted :(
    ... My old eyes can't zero in on the small fonts on a 36" LCD TV that was my monitor. ... The power supply has a label on it, with a brand name and model number. ... If you don't actually have an IDE connector inside your new computer, ... Ultra ATA 133/100/66/ hard disk drives to the latest Serial ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: AlphaServer 1200 powering off by itself.
    ... check but you mention you have seven 18GB drives in the machine. ... in another post i mentioned plans to swap power supplies. ... connector to the drive cage. ... on the fans? ...
    (comp.unix.tru64)
  • Re: E520 ands BIOS HD Setting
    ... I can't prevent a RAID setup using the two disks independantly? ... made a "Y" adapter cable to run from the older style power plug which is ... disks of different sizes could be used in a raid configuration, but there may be some wasted space as the the size of the smaller size will dictate the maximum usable size of all the drives in the raid. ... You can find drive installation instructions in the manual under 'removing and installing parts'... ...
    (alt.sys.pc-clone.dell)
  • Re: Third HDD Problem
    ... data connector and stealing the power connector from an extra ... If you don't know anything about RAID on this system, ... drives marked as raid enabled does not mean that they are configured for use ...
    (alt.sys.pc-clone.dell)
  • Re: AlphaServer 1200 powering off by itself.
    ... i swapped drives and the "working" machine still works and the "non-working" still doesn't. ... in another post i mentioned plans to swap power supplies. ... connector to the drive cage. ... on the fans? ...
    (comp.unix.tru64)