Re: DMA support in GX150?


"S.Lewis" <Gossamer@xxxxxxxxxxxxxxx> wrote in message
news:Ws4Sj.1501$_.613@xxxxxxxxxxxxxxxxxxxxxxxxx

"Ben Myers" <ben_myers_spam_me_not@xxxxxxxxxxx> wrote in message
news:dhkh145mo7vk7lcpoa8vanka8ugsqopb29@xxxxxxxxxx
The only question I have is whether the Intel chipset drivers for the
GX150
motherboard chipset are installed? If not, you would not see DMA. If
so, you
would see a DMA checkbox in the drive's properties... Ben Myers




Or for the primary and secondary IDE controller in device mangler. I
don't recall if there are DMA settings (enable/disable) in that model.....


Stew


Meh.....let me try that again:

I don't recall if there are any BIOS settings to enable/disable DMA in that
model.



.

Relevant Pages

  • Re: k3b very slow, troubleshooting help
    ... >> I don't believe that DMA is enabled for the cd writer. ... It is for all 3 hard drives. ... Presuming that DMA were enabled for the cdrw, ... > and enable it if it is off as I seem to recall. ...
    (alt.os.linux.suse)
  • Re: k3b very slow, troubleshooting help
    ... > I don't believe that DMA is enabled for the cd writer. ... It is for all 3 hard drives. ... Presuming that DMA were enabled for the cdrw, ... and enable it if it is off as I seem to recall. ...
    (alt.os.linux.suse)
  • Re: video freezing ib preview window
    ... tweaking the DMA settings. ... will run into the DMA settings issue ... got DMA mode 5 for both drives 0 and 1. ... >is the right selection... ...
    (microsoft.public.windowsxp.moviemaker)
  • Re: video freezing ib preview window
    ... tweaking the DMA settings. ... will run into the DMA settings issue ... got DMA mode 5 for both drives 0 and 1. ... >is the right selection... ...
    (microsoft.public.windowsxp.moviemaker)
  • Re: Problem With Nero Under XP
    ... >I also use a the freeware version of DeepBurner and ... Check to make sure your CDRW drive is using DMA. ... DMA settings do not get carried over. ...
    (microsoft.public.windowsxp.general)