Re: Windows XP Installation hangs at the "Setup is starting windows" message

On Sat, 08 Sep 2007 09:41:42 -0700, Daniel <daniel.rascoe@xxxxxxxxx>
wrote:

I think the computer does see the hard drive because, the hard drive
activity light does blink as files are presumably copies from the CD
to the hard drive. It's only when "Setup is starting windows" is
reached that the computer will not progress in the installation
process. I am not getting error messages. The computer just won't
progress further in the installation. I did find driver file R133282
which contains the txtsetup.oem file. I pressed F6 and loaded the 2
drivers in this file, but the installation still froze at "setup is
starting windows". This problem seems to have me stumped.

On Sep 7, 7:05 pm, "WSZsr" <nos...@xxxxxxxxxxx> wrote:
Not so. If XP did not recognize the Sata controller, it wouldn't even see
the hard drive.

"Barry Watzman" <WatzmanNOS...@xxxxxxxxxx> wrote in message

news:46e1783c$0$18929$4c368faf@xxxxxxxxxxxxxxxxx

My guess is that XP's setup program doesn't recognize the SATA hard drive.
If that's the case you need an "F6 Driver Disk". This would normally come
from the maker of the SATA controller, which is probably the main chipset.
So you might find it at, for example, the Via or AMD(ATI) web site (not
sure what chipset that computer uses).


I'd check the drive to make sure it's on cable select and then I'd
start looking at the bios to see if everything looks okay. I might
try to unplug some peripherals to boot up the least items as possible
as it could be faulty hardware. You might even consider removing or
reseating your ram. You could also try to d/l some hard drive
diagnostics from you hard drive mfgr to check the drive. After this,
my mind is blank for the moment :( .
.

Relevant Pages

  • Re: CHKDSK NTFS file system corruption boot screen message flooding (SOLVED)
    ... Your Installation Specialist ... Windows XP SP3 detects a disk problem at boot time and runs chkdsk. ... or registry fix for large LBA drives, ... older Microsoft-certified ultra.sys driver. ...
    (microsoft.public.windowsxp.general)
  • Re: Looping shut down
    ... password during setup. ... First, go to Windows Explorer, go to Tools, select Folder ... If your system is set to be able to> boot from the CD, it>>should detect the disk and give a brief message, during> the boot up, if you>>wish to boot from the CD press any key. ... you will> come to a screen>>with the option to setup Windows or Repair> Windows Installation>>using the Recovery console. ...
    (microsoft.public.windowsxp.accessibility)
  • Re: remote performance monitor problem
    ... allowed programs in your Windows Firewall setup. ... you have an installation problem - as the Windows Embedded ... unable to add objects to the chart since the Object lists are empty. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: More Problems - XP Will Not Boot - 2nd Computer - Following Up
    ... Sorry that I cannot help with regard to your RAID0 setup as I ... volumes available for the installation of XP. ... I have made sure to load current RAID drivers during the XP Set ... I created and two Windows XP system disks.) ...
    (microsoft.public.windowsxp.general)
  • Re: 0x000000D1 Message
    ... Uninstall it and let Windows re-install it to see what happens. ... Update then check the hardware section to see if an updated driver ... Your Installation Specialist ...
    (microsoft.public.windowsxp.general)