Re: Dell 8400 Corrupt Drive File Retriveal



If you'd like to......

You should be able to go to your local computer store and by a small adapter
that plugs into the notebook 44pin IDE connector that in turn allows you to
connect it to your IDE controller in your 8400 just like another HD.

The adapters can usually be had for around $10
http://www.microcenter.com/byos/byos_single_product_results.phtml?product_id=219555

From there, you can do anything you'd like. Partition, format, delete,
etc....



"Dobie925" <u24468@uwe> wrote in message news:63bd284bd66fc@xxxxxx
Just put in a new Hard Drive b/c first one stated it was corrupt & would
not
load windows, something about the boot. Anyways, I called India, we tried
to
fix the problem but was unsuccessful, hence they sent me a new one. I
still
have the corrupt Hard Drive. Is it possible to: 1. Hook up the corrupt HD
and
retrive my files with the new HD as primary boot without messing
everything
up, if so how? 2. If I can retrive some or all of the files from the
corrupt
HD, how do I clean up the corrupt HD and start a new? I would hate to toss
it,
I need the extra space. I would be willing to wipe it completely clean and
put in a new operatiing system, etc. Upon running a diagnostics check on
the
corrupt HD it stated "media write is protected" and this error caused a
boot
problem so Windows would not load. I can only assume that i downloaded a
protected music file. Please Help!

D.L.


.



Relevant Pages

  • Re: Format IDE HD on PT68K4 - OS68K V2.4
    ... It's a very long time here too: my system has been running on a WD 120 MB IDE disk since the mid '90s. ... make a boot floppy from the new bootfile ... load and iniz the formattable descriptor and format the HD drive ... Just do it via an IDE:Flash adapter and do check that the adapter contains firmware that evenly distributes writes across the card. ...
    (comp.os.os9)
  • Re: ata and seagate microdrive problems
    ... I'm trying to install current on via itx using ide 44pin to cf adapter ... a seagate 8GB microdrive. ... I thought it was to be ok, but just today when I received the adapter I ... but tell me how to boot in debug, as I can't boot it from itself, and I ...
    (freebsd-current)
  • Re: Boot from PCMCIA-CF card with no floppy?
    ... to CF adapter, not an IDE to CF adapter. ... assuming the machine can't boot from USB) is an IDE->CF adapter. ... (Research into Booting a Linux System with an IDE - Compact Flash Adapter) ...
    (comp.sys.laptops)
  • Re: missing ntldr
    ... Your second (corrupt) hard drive will be set as slave. ... automatically boot from that drive so you can then scan your 'slave' drive ... >> statement' At this stage has windows xp setup gone through the initial ...
    (microsoft.public.windowsxp.general)
  • RE: Safe Mode boot question
    ... It would not boot into any mode from the boot menu, ... I am suggesting to her that she ship me her corrupt HD so that I might ... into Safe Mode on my computer with her HD to see if I have reason to ... prompt mess up the HD necessitating activation once I sent it back to her? ...
    (microsoft.public.windowsxp.general)

Loading