Re: installing dell resource cd
- From: "Tom Scales" <tjscales@xxxxxxxxx>
- Date: Sun, 11 Jun 2006 17:56:12 GMT
None of those ports have anything to do with the network. The PCI
communications device is likely a modem.
Download the driver called Intel 10/100 LOM. Just install the driver, not
the other things. Looks like you have the Intel rather than the 3Com.
Could have been either one.
Tom
"tom" <tom@xxxxxxxxxx> wrote in message
news:RYWig.4635$lp.3853@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
With everyones help, I was able to get the sound and video working on this
machine. However after downloading the 3Com 3C905C drivers and the
Diagnostics Utility, i am still unable to get to recognize the integrated
network card. The Ethernet Controller and ther PCI Communications
Controller still gets flagged with the yellow question mark.
I have noticed there are extra extra com ports on this machine. I am
guessing they had some sort of network on it that used com ports. I do not
know that much about the com ports. It also has the ethernet network
connection marked as disabled. When i looked at the Network Interface
Controller in the setup, it is listed as being ON. I can change it to "ON
w/ PXE.....ON w/RPL....or OFF.
Maybe it is possible someone changed the com port on the network
controller?
There are 5 connections marked as com ports. There is one marked Manual
Station. Two printer ports and one is marked disabled.
I was woindering if i take all the extra cards out maybe the system will
see the network controller and put it on the correct com port? I am
guessing here, but I am sure ya'll can tell, my knowledge is limited on
this subject.
I do appreciate any and all help.
"tom" <tom@xxxxxxxxxx> wrote in message
news:xNyig.4187$lp.361@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Optiplex GX60
I recently had to fdisk and reformat the hard drive. I was able to get
Windows XP installed. However the Dell Resource CD is another story. I
ran the setup, and it seemed to install just fine. The drivers for the
Ethernet Controller, Multimedia Audio Controller, PCI Communications
Controller (which there are 2 entries for this), and the video controller
did not install.
I went to the help file and it said unzip and install the Desktop System
Software first. I unzipped the files and it was installing until it
popped up a window that says..."Setup Cannot Run On This Machine" I also
unzip some other files to the Dell directory but nothing so far as seemed
to work.
I just changed ownership of this machine through Dell and they sent me
the 2 restore CD's. Any chance they sent a wrong disc?
Does anyone have any idea how i can get all the drivers installed?
.
- References:
- installing dell resource cd
- From: tom
- Re: installing dell resource cd
- From: tom
- installing dell resource cd
- Prev by Date: Re: New Dell computer
- Next by Date: Upfront USB Ports for Dell 2400
- Previous by thread: Re: installing dell resource cd
- Next by thread: Re:A Big Thanks.. installing dell resource cd
- Index(es):
Relevant Pages
|