Re: External Hard Drive Not Recognized



----- Original Message -----
From: "Steve W." <Dugdug56@xxxxxxxx>
Newsgroups: alt.sys.pc-clone.dell
Sent: Sunday, December 04, 2005 8:54 PM
Subject: Re: External Hard Drive Not Recognized


>
> What do you have the jumper on the drive set to? How is it formatted?
> The first USB case I bought called for master on the drive. The next
> said it didn't matter. The new ADS I have now doesn't care. Also the
> first time I installed it on my Dell it didn't show up until I updated
> the drivers from the web site. Then it worked fine.
> --
> Steve Williams
>
>
> "hoerschy" <hoerschy@xxxxxxxxxxxxxxxxx> wrote in message
> news:5lNkf.14655$cR4.1335@xxxxxxxxxxx
>> I recently purchased an Adaptec USB 2.0 external hard drive enclosure
> that I
>> wanted to use with a working 4.3 gig Western Digital hard drive that I
> had.
>>
>> I plugged the USB 2.0 cable into my Dimension 4600 and the computer
> noted
>> that it found some new hardware and said that it was a USB to IDE
> hardware
>> device. It then said that the driver was installed but this driver
> required
>> the computer to be rebooted. I rebooted the computer and then plugged
> the
>> USB cable back in. It noted the model number of the hard drive but
> then
>> indicated that there was a problem with the hardware installation and
> the
>> hardware might not work.
>>
>> Well, there was a problem alright. The drive does not show up in
> Device
>> Manager or in Windows Explorer. I deleted the USB controllers in
> Device
>> Manager and then had the computer find the controllers and went
> through the
>> installation procedure for the external hard drive again. Same
> results. I
>> then tried installing this external hard drive in my Inspiron 6000.
> Same
>> results. Tried this several times over a couple of days on both
> computers
>> using various USB ports but had no success.
>>
>> As a last resort, I tried the external hard drive on my old Gateway
> 800. It
>> recognized the hard driver immediately and was usable, even though
> this
>> computer only has USB 1.0 ports. The only other thing different was
> that
>> both Dells were using XP Home and the Gateway was using XP
> Professional.
>>
>> Can anyone explain why this drive will not work in my Dell computers
> but
>> will work fine in my old Gateway. I really wanted this for my Dells.
>>
>>
>
>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet
> News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
> Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption
> =----

The instructions said to set the hard drive to master which is what I set it
to originally. Eventually, I tried all of the settings without any luck.
Which drivers did you upgrade? From what I can tell, I am up to date on all
drivers that would have an affect.


.



Relevant Pages

  • Re: [SLE] 9.3 woes (the epilogue?)
    ... Carl E. Hartung wrote: ... > These problems aren't being caused by hardware: ... > The installation runs fine, as does YOU and all the dependencies are met. ... USB printer, USB scanner, CH Joystick and pedals, ...
    (SuSE)
  • Re: printing
    ... To install USB device with Virtual PC: ... Installation or reinstallation of the USB printer: ... bar menus then tools then Windows Update. ... 2-1 It is necessary to download the last drivers and to install them. ...
    (microsoft.public.mac.virtualpc)
  • Re: Cannot add any PnP devices
    ... No new USB Flash drives would work and then I ... The new hardware is detected. ... passed Windows Logo testing to verify its compatibility with Windows ... Check the devicemanufacturer support site for installation ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Blue Screen/shut down
    ... Drivers are coded files that come on the installation disks with hardware ... You have to install drivers in order for hardware to work. ... That is a nice video card hope that isn't causing any problems. ...
    (microsoft.public.windowsxp.newusers)
  • Re: About git-bisect
    ... Well, it tends to depend not just on hardware, but on distribution too. ... Some drivers only work as modules, ... expect to connect a lot of random USB devices), ... build and just not support random things like tablets etc at all. ...
    (Linux-Kernel)