Re: Uncorrectable data error...



But I'm confused. This happened to a WORKING copy of XP, didn't it? The
SATA drivers would have been installed and working.

Tom
"Dan" <jasdfosd@xxxxxxxxxxxx> wrote in message
news:rudsm1tgb5ibdm3rfa01r94jc1bqig21o0@xxxxxxxxxx
> SATA RAID drivers are available off dell.com. If you have a second
> internet-accessible computer you can download the files and create a
> set of floppy disks. Of course, not having a floppy drive in the 8400
> is a significant obstacle to this plan. Like someone said in an
> earlier thread, hopefully Dell slip-streamed these drivers into your
> XP reinstall CD and your HD will be detected when you boot to the CD.
> Otherwise if no HD is detected, you can't do too much.
>
> Wish I was nearby, I have about 20 of the 3.5" drives in my basement.
> Maybe when the zip-drive patents expire in a couple of years they'll
> start installing those in computers.
>
> Another wonderful floppyless experience brought to you from the
> far-sighted designers at dell. We're also adding a Maxtor HD with bad
> sectors (ie dying hard drive) to the mix ;P It just keeps getting
> better....
>
> Dan
>
>
> On Sun, 06 Nov 2005 16:51:22 GMT, "Dave P @ AeroLogic <dpinella@"
> <"NOSPAM>cinci.rr.com"> wrote:
>
>>
>>
>>Glenn Banwell wrote:
>>
>>> "Tom Scales" ?tomtoo@xxxxxxxxxxxx? wrote in message
>>> news:0vpbf.185600$xl6.135097@xxxxxxxxxxxxxxxxxxxxxxxxxx
>>> ?
>>> ? "Glenn Banwell" ?postmaster@xxxxxxxxx? wrote in message
>>> ? news:CNnbf.1874$Lw5.1155@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>>> ??
>>> ?? "Dave P @ AeroLogic ?dpinella@ cinci.rr.com ?" ?"NOSPAM? wrote in
>>> message
>>> ?? news:b3nbf.121507$tD4.9758@xxxxxxxxxxxxxxxxxxxxxxxxx
>>> ??? Hi,
>>> ???
>>> ??? My Dimension 8400 (running Win XP) is failing in the Dell
>>> diagnostics. I
>>> ??? was doing a defrag on the HD and it seemed to stop so I aborted it.
>>> Now
>>> ??? it won't boot and I can't boot from the Windows CD. It says it can't
>>> ??? find the hard drive.
>>> ???
>>> ??? 1) When booting from the HD (regular start up) I get an error about
>>> ??? HAL.DLL not being found.
>>> ???
>>> ??? 2) It won't boot from the CD and says the hard disk can't be found.
>>> I
>>> ??? thought I could do a Windows refresh or some such thing...
>>> ???
>>> ??? 3) I run the DELL diagnostic CD and it says: MSG Block 128960,
>>> ??? Uncorrectable Data Error on media or is write protected.
>>> ???
>>> ??? Anybody have any suggestions as to what to try?
>>> ???
>>> ??? Thanks!
>>> ???
>>> ??? Dave P
>>> ???
>>> ?? http://www.kellys-korner-xp.com/xp_haldll_missing.htm
>>> ??
>>> ??
>>> ?
>>> ? Don't most of these require the machine to boot?
>>> ?
>>> yeah you're right but I'd wager the reason his machine doesnt recognise
>>> the
>>> HD when trying to boot from CD is that he hasnt hit F6 to install the
>>> SATA
>>> drivers from floppy?
>>>
>>> Doing that and then selecting the Repair Windows option might be enough
>>> to
>>> get him up and running.
>>
>>I now hit F6 and I see where the floppy is requested... I'm not up on the
>>acronym SATA and don't have any floppy's since none came with the machine.
>>Can I
>>get these off of the web? Is it Maxtor HD stuff?
>>
>>Thanks!
>>
>>
>


.



Relevant Pages

  • Re: External floppy drives vs winxp install
    ... I bought a USB drive an even though my board supports USB floppy, ... SATA drivers have typically NOT been part ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Help With Boot Problem
    ... The single beep during boot for AMI BIOS apparently indicates a DRAM Refresh ... SATA HD's and they seem to be OK. ... As soon as the XP disk begins to boot you are prompted at the bottom of the screen to press F6 to install additional drivers. ... Keep an eye for the F6 prompt or you may miss it. ...
    (microsoft.public.windowsxp.general)
  • Re: Failure to boot, enumeration, unrecoverable errors and a 2 year old boy.
    ... PC will now not boot after Junior's little antics. ... Given the presence of a raid controller, you may need the Raid drivers ... on a floppy in order for the recovery console to work properly. ... extract them to a floppy disk. ...
    (microsoft.public.windowsxp.general)
  • Re: F6...ok...but where are the drivers?
    ... If memory serves, you won't need any ... if you are using the Intel SATA controller. ... Should you need the SATA drivers for some reason, ... There a manual methods for extracting the proper files to a floppy, ...
    (microsoft.public.windowsxp.hardware)
  • Re: To floppy or not to floppy?
    ... etc and you might as well include the raid drivers if you actually use ... I did slipstream SP2 but not the drivers. ... Its only the real dinosaurs that cant boot a CD and thats fixable even ... floppy in my system just for the convenience, ...
    (alt.comp.hardware.pc-homebuilt)

Loading