Re: Cannot Access BIOS on GX-110 PC
- From: "Mike" <wxyz09@xxxxxxxxx>
- Date: Mon, 31 Oct 2005 12:17:54 GMT
"Christopher Muto" <muto@xxxxxxxxxxxxxxxx> wrote in message
news:U_g9f.7775$bD.1072@xxxxxxxxxxx
>i never heard of that feature... it isn't listed in the documentation
>either. if you don't see the "press <f2? key to enter setup message"
>shortly after powering on the system then you may just have what i would
>call a slow monitor (one that dosen't display the initial image until
>several seconds of receiving the first singal). if that is the case then
>just power on and start striking f2 repeatedly... and if that dosen't do
>it then i am at a loss as what to suggest.
>
> "Mike" <wxyz09@xxxxxxxxx> wrote in message
> news:wMf9f.20291$ti.19841@xxxxxxxxxxx
>> Pressing "F2" does nothing. I believe I disabled entering the bios when
>> set up the pc years ago.
>>
>> Mike
>>Yes,, even "keyboard failure" doesn't bring up Setup. i configured it
>>this way because it was going to a remote sitre. I'll figure it out
>>tofday at work and post the solution here.
.
- References:
- Re: Cannot Access BIOS on GX-110 PC
- From: Ben Myers
- Re: Cannot Access BIOS on GX-110 PC
- From: Mike
- Re: Cannot Access BIOS on GX-110 PC
- From: Christopher Muto
- Re: Cannot Access BIOS on GX-110 PC
- From: Mike
- Re: Cannot Access BIOS on GX-110 PC
- From: Christopher Muto
- Re: Cannot Access BIOS on GX-110 PC
- Prev by Date: Re: Dell C610 - upgrade path
- Next by Date: Re: Battery meter missing
- Previous by thread: Re: Cannot Access BIOS on GX-110 PC
- Next by thread: Re: Cannot Access BIOS on GX-110 PC
- Index(es):
Relevant Pages
|