Problem installing second hard drive

On my Power Edge 400SC BIOS version A08, running Win XP...
my Primary drive is a Wesr=tern Digital WD400BB
I have tried to install a second drive(SeagateST380013A)
Both drives jumpered as Cable Select.
The BIOS only recognizes the Primary drive.
Connecting the Seagate on its own it is recognized.
Is there some compatability issue with different makes of drives?
I have also tried jumpering as Master & slave ...same result.
Is there anything else I could try?






.

Relevant Pages

  • Re: Harddrive Delima
    ... >> Wish I had gotten your msg earlier, I just ordered a new BIOS ... >> I am using the proper cabling but the old 20 GB drive is master and is ... the Segate isn't recognized by the BIOS so I can't make ... When I install only the Segate it boots and works fine ...
    (microsoft.public.windowsxp.hardware)
  • Re: XP Home(SP2) on 2 hard drives
    ... Plus they will install ... set my IDE drive as a slave and keep my current operating system on ... it would it be recognized and would I be able to boot to the master ... I'd have to set the boot options in BIOS??? ...
    (microsoft.public.windowsxp.basics)
  • Re: PIO-Modus
    ... IDE Primary Master: Samsung SP1614N ... Slave: Samsung SP2514N ... Hat/kann er im BIOS statt "auto" irgendeinen anderen Mist reingezwungen haben? ... Schau mal, ob es nicht auch einen Update gibt. ...
    (microsoft.public.de.german.windowsxp.hardware)
  • Re: RAID 1 - 2x160 GB SATA aber wie?
    ... Wenn ja, erscheint die im BIOS, wenn die Hauptplatte ... Hauptplatte statt auf Master auf Master und ... Platte als Slave)? ...
    (microsoft.public.de.german.windowsxp.hardware)
  • Installing 2nd HD Prob
    ... under primary slave. ... Bios you should see primary master and secondary master. ... >But when the computer loads from 'cold' it loads the BIOS ...
    (microsoft.public.windowsxp.general)