Re: Update: How do you control the Perc 2/SC in Windows XP?

I re-read your post. You ahve a server class machine. Put a proper Server OS
on it, and you will be fine.

- NuTs

"NuTCrAcKeR" <nutcracker@xxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:3bqdnQ4CUcRoMEDfRVn-iw@xxxxxxxxxxxxxxxx
> dont use the AMI driver.
>
> Update your controller FW, and install the latest driver supported by XP
> (from the dell site, NOT the MS driver).
>
> Then, just install the Array Manager. no reason to have System
> Administrator on there, as its likely not a server class machine.
>
> Once you get a supported FW/Driver pair, the array manager should see it
> no problem. You may consider trying the 2003 drivers if there are no XP
> drivers available. I havent tried that, and generally dont put
> server-class array controllers and such into my workstations.
>
> ftp://ftp.dell.com/scsi-raid/PERC2-WS2K3-632-A01.exe
>
> give that a shot. it might work. There is NO native XP driver.
>
> - NuTs
>
> <mysticron@xxxxxxxxxxx> wrote in message
> news:1121774726.552163.286480@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> Thanks for the response. I did end up trying lots of different
>> combinations of OpenManage applications from the Dell support website
>> and was never able to get Array Manager to see my RAID volume. When I
>> go to Array Manager Utilities/Versions, it says the PERC 2/SC cannot be
>> supported at the current driver/firmware version. It says my version is
>> "3.13/6.19 (XPCl6.1" and the required version is "3.13/6.35.2.32."
>> What I think this means is the Windows XP driver for the PERC 2/SC is
>> version 6.19 and I need at least 6.35.2.32? Problem is I don't see
>> this version or better of a Windows XP driver anywhere?
>>
>> The latest AMI MegaRAID (which is what the Perc 2/SC is?) driver I can
>> find on the net is v2.68. It's for Win2K, so I figured it would work
>> with my WinXP Pro operating system. Now every time I boot my server I
>> get some kind of error.
>>
>> Any ideas on how I can get a management utility to run on my PowerEdge
>> server running Windows XP Professional with a Perc 2/SC RAID? I am even
>> willing to buy a management utility at this point just to be able to
>> see and work with my Perc 2/SC, after wasting a couple days trying
>> different versions of drivers and applications from the Dell support
>> website.
>>
>> Thanks for any advice!
>>
>> [Original Thread:
>>
>> I recently picked up a Dell PowerEdge 4300 with a Perc 2/SC RAID
>> controller. I installed MS Windows XP Professional on it and everything
>> seems to work great.
>>
>> I'm curious though about how I can run diagnostics and control the Perc
>> 2/SC? I browsed through some downloads on the Dell, AMI, and LSI Logic
>> websites and all I can find are drivers. When I look at disk management
>> or hardware devices in Windows XP, I don't see any special Perc 2/SC
>> options.
>>
>> Am I missing something? (Probably!) If someone could point me in the
>> right direction, that would be great. I have limited experience with
>> RAID, but have noticed with some cards you get a nice GUI application
>> to run diagnostics and control them. I have noticed that one of my six
>> hard drives has the far left light out, but the middle light continues
>> to blink in concert with the rest of the drives.
>>
>> Any other advice on utilities I should seek out for a fresh Windows XP
>> install on a 4300 would be great. So far it seems very stable running
>> my personal web and email services.
>>
>> Thanks for the help!
>>
>> From: "Fixer" <steve...@xxxxxxxxxxxx> - Find messages by this author
>> Subject: Re: How do you control the Perc 2/SC?
>>
>> What you need is a Dell DOSA & DOMA disk set which stands for Dell
>> Open
>> Server Assistant and Dell open Manage Assistant and with these you can
>> set
>> up your server you can also access the PERC BIOS by hitting Ctrl Alt
>> and A
>> or M on boot up watch the screen and it will tell you depending who
>> manufactured the PERC bios once in ther you can configure your
>> containers
>> and set your RAID. The DOSA and DOMA disk should have come with the
>> machine,
>> not sure if they are available on the Dell site you will have to
>> investigate
>>
>
>


.

Relevant Pages

  • Re: Update: How do you control the Perc 2/SC in Windows XP?
    ... > combinations of OpenManage applications from the Dell support website ... > go to Array Manager Utilities/Versions, it says the PERC 2/SC cannot be ... > this version or better of a Windows XP driver anywhere? ... Now every time I boot my server I ...
    (alt.sys.pc-clone.dell)
  • Re: Update: How do you control the Perc 2/SC in Windows XP?
    ... and install the latest driver supported by XP ... (from the dell site, NOT the MS driver). ... > combinations of OpenManage applications from the Dell support website ... > go to Array Manager Utilities/Versions, it says the PERC 2/SC cannot be ...
    (alt.sys.pc-clone.dell)
  • Update: How do you control the Perc 2/SC in Windows XP?
    ... combinations of OpenManage applications from the Dell support website ... What I think this means is the Windows XP driver for the PERC 2/SC is ...
    (alt.sys.pc-clone.dell)
  • Re: MS Word crashes when loading with default network printer
    ... I assume you are using the latest driver available on the Dell web site. ... I'm sure you would have the same failure if the print server were 2008. ... You can install the Vista inbox driver by remotely adding ...
    (microsoft.public.windows.server.general)
  • MS Word crashes when loading with default network printer
    ... I have a Win2k3 server that is a print server. ... Dell ships a single install package for the printer for XP,Win2k3, and Vista. ... XPS Document printer driver. ...
    (microsoft.public.windows.server.general)