Re: THURS. 7/21 evening smokes



On Jul 21, 7:24 pm, Chris Stout <nismo2...@xxxxxxxxxxx> wrote:
Heya all!

Puffing on some McClelland P.M. Pipe in my Nording Eriksen apple. Trying
to beat the heat with ice water on the side.

-Chris

************
evening greets Chris, ASP. "Down" to 84, windy, heat index 88 now in
Western NY. Finished tiny bowl Ascorti "Business" calabash with '06
Frog/Bayou, tea/read evening "rag" on the side. Still no negative
comments re: the Syria latakia from da Mrs. After checking a few sites
& latest e-messages..........to the chats.

Ed Duncan, Batavia, NY
pipe since '62, brain addled/mindless forever
.



Relevant Pages

  • Re: sweating copper part 2
    ... pipe on both sides, therefore not enough heat. ...  It is a water soluble flux, both flux and lead free solder by ... This involves "dry fitting" ...
    (alt.home.repair)
  • Re: sweating copper part 2
    ... pipe on both sides, therefore not enough heat. ...  It is a water soluble flux, both flux and lead free solder by ... This involves "dry fitting" ...
    (alt.home.repair)
  • Re: Job growth collapsed under Bush.
    ... I bought some stove pipe to ... upstairs bedrooms are over the garage and will benefit from the heat, ... I have several glass block windows in the basement, that have a louvered opening on the outside, and a square piece of glass on the inside. ... I made a square the same size as the glass, out of cement board. ...
    (misc.survivalism)
  • Re: sweating copper
    ... I have some 1/2 inch type M copper pipe and 4 90* elbows that I'm ... yesterday was able to solder one end of each ell to 2 tubes. ... Where are you applying the heat? ... joint between the pipe and the fitting. ...
    (alt.home.repair)
  • Re: sweating copper
    ... I have some 1/2 inch type M copper pipe and 4 90* elbows that I'm ... yesterday was able to solder one end of each ell to 2 tubes. ... Where are you applying the heat? ... joint between the pipe and the fitting. ...
    (alt.home.repair)