Re: Bruised forehead...
- From: Sarah Dale <sarah@xxxxxxxxxxxxxxxx>
- Date: Mon, 09 Jun 2008 22:28:24 +0100
BEI Design wrote:
...from banging my head on the sewing table!
cutting off the excess stabilizer, I realized I had failed to make the last thread change, a red bar separating the upper and lower text of the logo. Aaaarrgghh!
Beverly,
Know the feeling - I was doing it as well on Sunday! I mean curtains, how easy - but I ended up ripping out two seams!
Seam number 1 came out when I realised (6" from the end) that I had the lining fabric at 90 degrees to the main fabric - in my defence I must point out these curtains are nearly square! and the lining is blackout lining.....
Seam number 2 came out on the same curtain when I realised after sewing it that the fabric had bunched up every now and again and was now semi-gathered on the lining ARGH!
And then DD woke up Monday night whilst I was sewing the header tape on to curtain #1..... so all work stopped.
Curtain #1 has now just been hung, and curtain #2 just awaits header tape. Then I can swap colours in the SM and sew the rod pocket for the sheer.
Sarah
.
- Follow-Ups:
- Re: Bruised forehead...
- From: BEI Design
- Re: Bruised forehead...
- References:
- Bruised forehead...
- From: BEI Design
- Bruised forehead...
- Prev by Date: Re: Singer 9020 T bobbin help.
- Next by Date: Re: Thread tension?
- Previous by thread: Bruised forehead...
- Next by thread: Re: Bruised forehead...
- Index(es):
Relevant Pages
|