Re: Bobbin thread not added to top stitching - help?



stumblesally@xxxxxxxxx wrote:
Beverly & Autumn,

Thanks, I'll try cleaning the thread path. I had already
replaced the needle, but that was no help. I'm using a
size 14 needle for a cotton/ poly blend of fabric (my
practice fabric). The type of thread I'm using is
mercerized cotton/polyester. I guess I could try a
different thread that I've used before with success and
see if that helps. Eventually, I'd like to sew up a seam
on a pair of my son's warm-up pants that are all nylon.
What size needle would you suggest for nylon?

I would probably use either a 9 or 11. Also, if the warm-ups are
*knit* be sure to use a *ball-point* needle.

Kirsten's suggestion that you must thread the needle path with
the presser foot *up* is also very important.

Good luck,

Beverly


.

Relevant Pages

  • Re: Bobbin thread not added to top stitching - help?
    ... I'll try cleaning the thread path. ... I'm using a size 14 needle for a cotton/ ... pants that are all nylon. ... too...when I pull the lower thread out (after it's been brought out by ...
    (alt.sewing)
  • Re: Making a float chamber fuel level needle
    ... repair shops, which would have lots of carb parts 20 years ago, prolly ... needle had what looks like a neoprene tip 60 ... My nylon body works well for the larger part and doesnt wear out the barrel ... Might be able to convert the carb to use one of them. ...
    (rec.crafts.metalworking)
  • Re: How to sew with Wooly nylon?
    ... I have the Wooly Nylon on the ... the wooly nylon in the bobbin. ... If you try to use wooly nylon in the needle then there will be ... to loop around the bobbin relies/depends on a loop of thread to ...
    (alt.sewing)
  • Re: Making a float chamber fuel level needle
    ... If it doesn't exactly fit, ... I turned one up out of nylon which works but obviously allows leakage as ... needle had what looks like a neoprene tip 60 ... My nylon body works well for the larger part and doesnt wear out the ...
    (rec.crafts.metalworking)
  • Re: Making a float chamber fuel level needle
    ... I turned one up out of nylon which works but obviously allows leakage as ... the fuel tank level is critical! ... needle had what looks like a neoprene tip 60 ... needle valves on some older model vehicles which may be able to be modified ...
    (rec.crafts.metalworking)