Re: sewing lace



On Mon, 26 Sep 2005 17:07:54 -0400, "Ward" <ward@xxxxxxxx>
wrote:

> I use wax paper for everything. I tape too long sheets
> together and put it over pattern tissue to trace off the right size for me.
> Sharpie pens won't run but just in case, I put Scotch tape over any markings
> that I want to stop from smearing.

You can mark on waxed paper with a knitting needle. (at
least the almost-transparent kind available in the US)

I bought a roll-end of newsprint -- only a couple of bucks,
and it isn't appreciably smaller after a year of use. I
mark it with a #2 pencil -- or carbon paper and a roulette
-- a tiny tracing wheel I got from a embroiderer's supply
house in the dim and distant past.

Joy Beeson
--
http://home.earthlink.net/~joybeeson/ -- needlework
http://home.earthlink.net/~dbeeson594/ROUGHSEW/ROUGH.HTM
http://home.earthlink.net/~beeson_n3f/ -- Writers' Exchange
joy beeson at earthlink dot net


.



Relevant Pages

  • Re: Was Dial indicator--now jointer
    ... mark directly from the stick as it is about 1/2" thick. ... So when I buy a new tape measure I stretch it out next to a trusted measure and check all the increments. ... rather the thin steel rules only be in that smallest increment like a tape measure. ... BUT when working with wood nothing is perfect and a perfect fit might be 8-1/32" when the design called for 8". ...
    (rec.woodworking)
  • Re: NTBackup will not recognise new tapes.
    ... I was on the phone with Sony (tape drive support) for about ... Try a backup with the /um switch. ... I think that even from the command line and using the /um switch, media ... With already used managed media I have been able to mark them as ...
    (microsoft.public.windowsxp.general)
  • Re: XP Pro SP2 Does Not See Tape Drive
    ... Mark L. Ferguson marfers notes for windows xp ... > I changed the Permissions as you suggested below. ... I then restarted my> computer, Started RSM, Started NTBackup and plaaced a blank tape in the ... > "Mark L. Ferguson" wrote:>>> Well, there is a hack for making the system change the access to storage,>> but I don't know if it applies to your error. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: NTBackup will not recognise new tapes.
    ... I think that even from the command line and using the /um switch, media ... With already used managed media I have been able to mark them as free ... Running using the /um switch, unfortunately, doens't help. ... into our Sony tape drive. ...
    (microsoft.public.windowsxp.general)
  • Re: data backup tool?
    ... For now I used ufsdump to save the filesystem contents to tape, but with increasing filesystem capacity this takes longer and longer now and more tape changes. ... To lower the data volume to save I'd like to mark some directories with "temporary" data in it as "do not save this", ... The only O/S I know of that DOES let you mark a file "nobackup" is OpenVMS; there is a one bit flag in the file header that tells the backup utility whether or not to save the contents. ...
    (comp.unix.solaris)