Re: Elk M1 and X10 (TW523)

"Jim" <alarminex@xxxxxxx> wrote:

Careful Jim. I don't know what a TW523 is, but if it has to
do with programing ..... I'm told that if you use the wrong
cord with the napco dongle, it can cause some damage.

You're right about the Napco PCI-MINI dongle. Use the wrong cord and you can ruin the PCI or the board. The M1 connection to X10 is much simpler. The preferred interface is the PSC05. You should use a standard, 4-conductor telephone cable.

--

Regards,
Robert L Bass

==============================>
Bass Home Electronics
DIY Alarm and Home Automation Store
http://www.bassburglaralarms.com
Sales & Tech Support 941-925-8650
Customer Service 941-870-2310
Fax 941-870-3252
==============================>

.