New Simon 3 erratic behavior

New Simon 3 all with fresh batteries.

I disarm the alarm with neither the doors&windows or Motion Sensors
on. Yet the motion sensor causes the alarm to trip. What's up with
that? I've had to take the battery out of the motion Sensor to stop
it.

Also, I suddenly get a keychain sensor error that can't be cleared
unless I delete the keychain from the device.

It's like it's got a mind of it's own. It's 4am eastern now and it's
woken everybody in the house up several times.

.

Relevant Pages

  • Re: New Simon 3 erratic behavior
    ... Sounds like a programming error. ... | New Simon 3 all with fresh batteries. ... Yet the motion sensor causes the alarm to trip. ...
    (alt.security.alarms)
  • Re: programming an Ademco Vista
    ... instant alarm EVER, it will always have the delay. ... If you have programmed the zones for NC then make sure you aren't using ... Open and close an entry/exit door. ... Wait for the exit delay to expire and then walk past the motion sensor ...
    (alt.security.alarms)
  • Re: Greater Toronto Area Recomendations?
    ... We are going through remodeling and have been wiring for an alarm system as we go. ... I understand it is all wireless so you have to see all the connections and 3) you activate and deactivate via your telephone and not a keypad. ... They wanted to install one door contact, ... When I explained to the guy that the best place for the motion sensor would leave the whole back end of the house exposed, he said: "We could always add a second motion sensor". ...
    (alt.security.alarms)
  • Re: Alegro question...
    ... I get the impression from the manuals that i need a door sensor to ... When i set it to monitor door, windows and motion sensor and i stay at ... of the motion sensor the alarm does not sound. ... By programming it as a motion (interior follower - either with or without delay) you are telling it to follow the actions of certain doors. ...
    (alt.security.alarms)
  • Re: Wireless Motion Sensor slow to start
    ... notice that if I do this test immediately after the alarm system delay ... Is there some additional delay before the motion sensor starts? ... This basically "saves" the battery. ... the sensor is "armed" to receive IR energy and transmit an alarm instantly. ...
    (alt.security.alarms)