XL2

Howdyall

Hey, on an XL2 if you don't know the installer code I forgot how to get it
out or reset it..is it the same as Ademco stuff?

Gotta do a preinstalled apartment system tomorrow for a client of ours.


.

Relevant Pages

  • Re: Help needed to recover/reset master code on DSC Power 832 in Toronto
    ... Sir, as Frank said, try the default master code of 1234. ... The other far more involved way is to reset the panel back to factory. ... installer code, and your board is effectively useless for local use until is ... you must have both the programming sheets and the knowledge to do ...
    (alt.security.alarms)
  • Re: DSC brain problem
    ... open because everything except the installer code has been defaulted back to ... home security with the same vintage alarm panel, ... The reset process seemed to ... > Anyone have any suggestions on how to reset this thing back to factory? ...
    (alt.security.alarms)
  • Re: Veritas 8C - needs a complete reset.
    ... It sounds like this is the way to do a factory reset. ... mode with the factory default user and installer code. ... Press RESET or SLOWLY ...
    (alt.security.alarms)
  • Re: FBII XL-21 installer code override
    ... use the default master user code, ... I have a LED panel and the default installer code just wouldn't work. ... which so happen to be able to reset ...
    (alt.security.alarms)
  • DSC brain problem
    ... The master code was reset to default, but the installer code appears to be locked out. ... After several different reset attempts, it eventually locked up hard with all the panel LEDs lit, and I can't clear them - even powering off for days, it still comes up with them all lit solid. ...
    (alt.security.alarms)