Re: Fire Panel Search

What type of smokes are we talking about? With 2 wire I can see your point.
But if its 4 wire, anything in the panel's voltage range will work. If I
remember, back in 1985 most of those small 4 zone panels used 4 wire smokes.

Jim Rojas


"ABLE_1" <royboynospam@xxxxxxxxxxxxx> wrote in message
news:RsydnblnhMHk927ZnZ2dnUVZ_r6dnZ2d@xxxxxxxxxxxxxx
Hello all,

Any one here know or have any info on a 4 Zone Panel that would have the
name on the door of "AUTH". The panel label gives a vintage of 1985. I
am trying to determine a Smoke Detector Compatibility for the panel.
Personally never heard of the name before and was hoping someone here may
have to point me to a web site if possible.

When I google the name "AUTH" I get the abbreviation for "Authority".

Were they bought out by somebody or just gave up the ghost??

Any hints or thoughts would be helpful.

Thanks,

Les




.

Relevant Pages

  • Re: Residential 110v Smoke conversion to 12vdc
    ... I would only do it with ahj approval and i would make sure romex is properly ... burg panel then tried to hook 120 volt 3 wire smokes to it needless to say ... only option i had was to go with 4 wire 12vdc smokes with reverse polarity. ... smokes that are interconnected as per proper building code. ...
    (alt.security.alarms)
  • Re: Interconnecting Smoke Alarms, And Capacitive Coupling ?
    ... Some smoke detectors operate on two wire systems and some on four wire ... wires are to power your smokes. ... The old smokes operated on a different resistance ...
    (sci.electronics.design)
  • Re: AC Smoke interconnection
    ... I refuse those requests to wire to AC smokes like that. ... owner wants fire monitoring. ... Could use relay with Kidde AC smokes? ...
    (alt.security.alarms)
  • Re: Heat detectors vs smoke detectors
    ... In the long run you may be better off with 2-wires smokes and a panel that supports them. ... I want to start replacing some of the heat detectors with smoke detectors, but the wiring in place is 2 wire looped from the panel then to every detector, then back to the panel. ...
    (alt.security.alarms)