Re: Scantronic 9800 bF every 5 minutes


<novarallyman@xxxxxxxxxx> wrote in message
news:1152994078.103141.284110@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Typical time for something like this to happen, approximately every 5
minutes a get a bF error and the internal alarm is going off. I gather
this is a battery fault in the control panel.
Is there anything I can do about it now to stop the internal alarm
going off, or to fix it entirely ( I assume an engineer code is
required to replace the battery ?)

I am assuming that it is NOT a monitored alarm system

Putting the panel into engineers mode will stop the Battery alarm from
sounding. (if you know what it is)

You shouldnt need an engineer code to change the battery, Customer
mastercode should suffice.



.

Relevant Pages

  • Re: Scantronic 9800 bF every 5 minutes
    ... engineer code and the company that last serviced it are no longer ... How do I change the battery? ... this is a battery fault in the control panel. ... Is there anything I can do about it now to stop the internal alarm ...
    (alt.security.alarms)
  • Re: Scantronic 9800 bF every 5 minutes
    ... I took the control panel off the wall on Saturday night and found there ... was a volume control inside for internal alarm, ... I will see if I can get a battery today. ... Paul Ekins ...
    (alt.security.alarms)
  • Scantronic 9800 bF every 5 minutes
    ... Typical time for something like this to happen, ... this is a battery fault in the control panel. ... Is there anything I can do about it now to stop the internal alarm ... or to fix it entirely (I assume an engineer code is ...
    (alt.security.alarms)