Re: need help to reset 449CST wireless smoke detector

The system's ready status has no effect on a properly programmed fire zone.
If the power is removed from a smoke detector, and a properly wired eol
relay is included in the circuit, that zone will go into the trouble
condition, not alarm.
js

"mz" <mzhao2005@xxxxxxxxx> wrote in message
news:1151540824.921658.3590@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Thanks very much for your help. If the system is not in normal
condition - not in ready status, will the alarm be triggered if the
power of the smoke detector removed?

alarman wrote:
If you reset the detector by removing power, and then it immediately goes
into alarm, you need to either remove and clean the optical chamber, or
replace the detector. If on the other hand you tried the reset sequence
specific to your control panel and the detector simply didn't reset,
either
your control may be improperly programmed, or the smoke detector is not
connected to the switched circuit.
js
"mz" <mzhao2005@xxxxxxxxx> wrote in message
news:1151466605.547725.24620@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Mark,

Thanks for your reply. I have tried to reset the smoke detector from
kaypad (*72). It failed to reset. Is there anyway to reset from the
detector?

mz

Mark Leuck wrote:
"mz" <mzhao2005@xxxxxxxxx> wrote in message
news:1151463164.126693.189120@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
need help to reset 449CST wireless smoke detector

*71

(snerk)




.

Relevant Pages

  • Re: need help to reset 449CST wireless smoke detector
    ... It does not matter what status the alarm is showing. ... If on the other hand you tried the reset sequence ... specific to your control panel and the detector simply didn't reset, ... your control may be improperly programmed, or the smoke detector is not ...
    (alt.security.alarms)
  • Re: need help to reset 449CST wireless smoke detector
    ... condition - not in ready status, will the alarm be triggered if the ... If on the other hand you tried the reset sequence ... specific to your control panel and the detector simply didn't reset, ... your control may be improperly programmed, or the smoke detector is not ...
    (alt.security.alarms)
  • Re: need help to reset 449CST wireless smoke detector
    ... a Hardwired smoke det. ... I have tried to reset the smoke detector from ... kaypad. ... It failed to reset. ...
    (alt.security.alarms)
  • Re: need help to reset 449CST wireless smoke detector
    ... If you reset the detector by removing power, ... specific to your control panel and the detector simply didn't reset, ... I have tried to reset the smoke detector from ...
    (alt.security.alarms)
  • Rewiring a Hardwired Smoke Detector WITH THE POWER ON
    ... I have a hardwired smoke detector that is old and outdated, ... like to switch with a new unit. ... the power is LIVE. ... in from a common hallway. ...
    (alt.home.repair)