Re: Can a Napco system & DSL connection co-exist?
- From: "petem" <petem001@xxxxxxxxx>
- Date: Fri, 24 Mar 2006 22:55:43 -0500
have you ever heard of pci dsl card?
here's a few
http://shopping.kelkoo.co.uk/b/a/ss_adsl_pci.html
used alot around here..
and yes this can happen,what will your insurance company will do if one of
your customer is in the situation..and what will be your liability?
when we all know that there are some device that are made to ensure good
functioning of both dsl connection and alarm panel?
all this to save 30.00$
and one other thing..lets say your customer after 3 years of not using that
nifty little plug where he could have plug a telephone in the back of this
dsl modem,but that you told him for what so ever obscure reason not to do
so,but he would really need the plug..he is tired of lifting his fat ass
from his chair(must have a website selling whatever stuff he doesn't have a
clue about)every time the phone ring..while he is in front of his puter..he
will plug a phone there..and when my crazy theft will come in and move all
the unusefull stuff from the desk that phone will be open and prevent
communication with the alarm central..
oups..too bad you didn't told your customer to use a small dsl filter for
rj31x...
act like a pro and use the good tool for the job...
"FIRETEK" <firetech(change-the-ch-to-k)@telus.net> a écrit dans le message
de news: VvUUf.7087$%H.885@xxxxxxxxxxx
You're splitting hairs. I've noticed this is a popular pursuit in this
Newsgroup. Chances are remote that any thief is going to rip out the
wires
for the DSL modem if he's after the computer. The only thing plugged into
the computer at this point is the network cable to the modem. A short
here
won't affect the phone line.
Regards,
Frank
"petem" <petem001@xxxxxxxxx> wrote in message
news:k8RUf.20571$%N6.293612@xxxxxxxxxxxxxxxxxxxxxx
Frank be careful,if the line is split in any ways before the alarmthe
panel,there is a possibility that if this splice get shorted or whatever
alarm panel wont be able to call the central station...at
the only correct way to connect a line to an alarm panel is using a rj31x
the demark point and then feeding from there the rest of the house..disrupt
lets say that the theft that just came in got to the computer of the
house
first,before the entry delay end,and rip the DSL modem from the desk and
doing so short the phone line,what will happen? what will you say to your
assurance company?
"FIRETEK" <firetech(change-the-ch-to-k)@telus.net> a écrit dans le
message
de news: DwKUf.1669$B_1.1407@xxxxxxxxxxx
If you take a moment to read the OP's post, the connection diagram he
supplied is the correct way to terminate an alarm system/dsl modem.
The
alarm will be able to communicate status and alarm messages without
interfering with the Internet connection. Mr. Bass is correct in this
instance. The OP doesn't need to purchase the extra filter.
Regards,
Frank
"grabbitt" <sn@xxxxx> wrote in message
news:AZ1Uf.339$yn4.303@xxxxxxxxxxxxxxxxxxxxxxxxx
Or
"Robert L Bass" <sales@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:ped022lq0sd2rdt8curp7iabt17uqltmt4@xxxxxxxxxx
Wrong advice. The gentleman is trying to make sure his DSL
doesn't go down during Napco's transmission. The plug-in DSL
filter will not work for him.
You can also purchase these online.
I sell them online but this gentleman doesn't need one. He's
better off using the split filter arrangement.
your age is really starting to show in your posts these last few
years.
is it just that you haven't actually done any low voltage work in manyjust
years. Or is it that you just are a bullsh---er at heart. Or are you
trying to sound like you are important, or are you just trying to
dialing.the GROUP?blocks
Here is cut and paste from Excelsus Technologies website, makers of
the
device I recommended.
Z-A431PJ31X-A Alarm Panel DSL Filter (RJ31X)
Description
Designed specifically for homes with alarm systems, the
Z-A431PJ31X-A alarm filter keeps DSL service, home phoneline
networking
(HPN) and alarm systems functioning as they should. The alarm filter
DSL and HPN signals from interfering with the alarm system's
voice-band
modem. At the same time, it isolates DSL and HPN equipment from alarm
equipment impedances. With this two-way protection, the alarm filter
keeps
the alarm system operating reliably around the clock and ensures fast,
uninterrupted DSL and HPN access even while the alarm system is
system
Notice how it states that the DSL stays up while alarm
youcommunicates. Now what was that you said about "wrong advice"? Did
mean your advice was wrong?
.
- References:
- Can a Napco system & DSL connection co-exist?
- From: news.vif.com
- Re: Can a Napco system & DSL connection co-exist?
- From: grabbitt
- Re: Can a Napco system & DSL connection co-exist?
- From: Robert L Bass
- Re: Can a Napco system & DSL connection co-exist?
- From: grabbitt
- Re: Can a Napco system & DSL connection co-exist?
- From: FIRETEK
- Re: Can a Napco system & DSL connection co-exist?
- From: petem
- Re: Can a Napco system & DSL connection co-exist?
- From: FIRETEK
- Can a Napco system & DSL connection co-exist?
- Prev by Date: Re: alt.security.alarms Original Proposal Message
- Next by Date: Re: Can a Napco system & DSL connection co-exist?
- Previous by thread: Re: Can a Napco system & DSL connection co-exist?
- Next by thread: Re: Can a Napco system & DSL connection co-exist?
- Index(es):
Relevant Pages
|