Re: GE Simon 3 HELP X-10 alarm not working

It won't work with an appliance module.

When Simon goes into alarm, it does not send On or OFF command to the PSH02.
I If I remember right, the X10 command sent by the Simon in alarm is well
documented in the specs of the PSH02.

You may also want to check if the power adapter that comes with your Simon
is X10 compatible.




"WildIrish" <wildirishtiming@xxxxxxxxxxx> wrote in message
news:1130536643.658253.261900@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> When I called X10, they claimed that the PSH02 ran using standard
> X10 commands.... I don't want to use the PSH02 I want to use
> an appliance module. If X10 is right, which they should be... the
> PSH02 should be receiving standard X10 commands and I should
> thus be able to switch an appliance module no? thanks!
>
> -Brendan
>


.