Re: Keypad removal

Two slots either on the top or bottom (i forget) put screwdriver in slot and
gently push to unlock the snaps, it will sorta hinge off in the opposite
direction of the slots...if slot on bottom it will hinge off towards the
top...some keypads also have tiny snaps on each side as well.

Then you'll see the mounting screws...just let it hang from the wires while
you paint.


<gesres@xxxxxxxxxxxxxxx> wrote in message
news:1130629684.754841.236230@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|I bought a house with a ADT Safewatch 3000. I'd like to remove the
| keypad to paint the wall, but can't see how it's attached.
| Suggestions?
|
| Thanks!
|


.

Relevant Pages

  • Re: To be sure
    ... The bottom line is that Office 2004 is NOT compatible with Spaces ... I have also had occasions where it simply snaps to a different space ... John McGhie, Consultant Technical Writer ... McGhie Information Engineering Pty Ltd ...
    (microsoft.public.mac.office.word)
  • Re: ACER AL1721 Dead
    ... Most of the LCD monitors are held together with internal plasic snaps ... use a flat blade screwdriver to pry ... I start at the bottom and try to insert the ... in the seam and slowly turn the handle. ...
    (sci.electronics.repair)
  • Re: 8573-401
    ... Undo the two large screws at the bottom of the machine. ... Dislodge the row of snaps. ... Ham Radio NU0C ...
    (comp.sys.ibm.ps2.hardware)
  • Re: snaps and French terry
    ... Sara Lorimer wrote: ... I want the covers to be snapped shut on the bottom, ... they can be removed easily if they get spat-up upon. ... Is it possible to buy snaps that aren't very secure and come undone ...
    (alt.sewing)