Re: Radionics 5700: lithium batteries



This is about the only solution for the older panels. Since the 9412
series, the lithium battery is "spring" held and easily replaced. But the
panel MUST be powered us in this scenario as well or else, poof, panel
repair.

X.

"Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:4xRSe.49$BS5.2518@xxxxxxxxxxxxxxxxxx
> Power up the spare one in the shop...solder in a new battery while it's
> powered up...and pray?
>
> I'm such an idiot..once I changed a lithium on an older DMP. I thought I
was
> supposed to power it down first...duh...pretty dumb.
>
>
>
> "Nomen Nescio" <nobody@xxxxxxxxx> wrote in message
> news:51e8650a863200c9650ec5c24663c91e@xxxxxxxxxxxx
> > Talking about dumbass ideas from Radionics:
> >
> > Soldered-in lithium batteries.
> >
> > When the panel loses both AC and battery power, if the lithium battery
is
> > dead you cannot get into the panel with a programmer. You have to send
it
> > back to the factory for a new battery. So if you have a spare 7212 on
the
> > shelf that's been sitting for a few years, odds are you won't be able to
> > program it when you need it. Same thing if you have an older panel out
in
> > the field that loses both AC and battery: the programming is gone, and
> > you
> > can't reprogram that panel.
> >
> > X. Boschman, if you know a workaround for this, you'd be performing a
> > public service by telling us about it.
> >
> >
>
>


.



Relevant Pages

  • Re: First Alert FA-210 panel keeps beeping
    ... Sometimes the panel ... it says it is due to low system power ... and the battery is used only when A/C power is disabled. ... reading is because the meter doesn't put any load on the battery so ...
    (alt.security.alarms)
  • Re: First Alert FA-210 panel keeps beeping
    ... Sometimes the panel ... But I checked the AC power and it seems to be feeding ... and the battery is used only when A/C power is disabled. ... I measure the battery voltage with A/C power adapter ...
    (alt.security.alarms)
  • Re: Solar powered battery charger for Nickel batteries
    ... I'm happy I can hold the solar panel near ... termination due to the variable power available from solar panels. ... In principle I could lay out a 60W panel in Arizona and charge the ... I have designed a solar battery charger for an autonomous system ...
    (sci.electronics.design)
  • Re: First Alert FA-210 panel keeps beeping
    ... Sometimes the panel ... it says it is due to low system power ... and the battery is used only when A/C power is disabled. ... I used a voltmeter to measure the voltage on the battery ...
    (alt.security.alarms)
  • Re: How to calculate a battery capacity
    ... power supply will be solar panels feeding a battery. ... battery and the power of the solar panel? ... Apply your estimated solar panel efficiency (6% for thin film, ...
    (sci.electronics.basics)