Re: Omega D2 Question

On 2005-10-01, Colyn <me@xxxxxxxxxxxxxxxxxxx> wrote:
> On Fri, 30 Sep 2005 18:09:35 -0700, Randall Ainsworth
> <rag@xxxxxxxxxxxxxxxxxxx> wrote:
>
>
>
>>It's been quite a few years since I had one, but there's a little
>>adjustment with the screws that hold the head on. Other than that, it's
>>only going to get so good.
>>
> True
>
> Most enlargers leak light unless you take the extra step to seal it.

Black card works well. Whatever you use, watch out for scorching or smoke
- some enlarger heads can get /hot/.

--
-- ^^^^^^^^^^
-- Whiskers
-- ~~~~~~~~~~
.

Relevant Pages

  • Re: AO Spencer binocular head repair
    ... >> I recently purchased a used AO Spencer binocular compound microscope ... The interpupillary distance adjustment works smoothly, ... > My guess is that this is an AO 10 head, ... > remove the 4 screws that hold a plate where your nose goes. ...
    (sci.techniques.microscopy)
  • Re: AO Spencer binocular head repair
    ... The interpupillary distance adjustment works smoothly, ... My guess is that this is an AO 10 head, ... replace the Bristol Splines with conventional screws. ... tension so it will slide back and forth but stop the eyepiece rocking you ...
    (sci.techniques.microscopy)
  • Re: Omega D2 Question
    ... >adjustment with the screws that hold the head on. ... Prev by Date: ...
    (alt.photography)
  • Re: Ted removal tips
    ... Remove plastics that surround Ted. ... Lift pf and remove screws tt hold Ted in place. ... Another post on what to remove to take Ted's head out. ... Carefully remove it from the game by lowering ...
    (rec.games.pinball)
  • Re: Selecting screw/nail sizes
    ... to make the pilot holes perfectly parallel to the face of the lumber. ... head screws you won't have that problem. ... the correct term for a straight sided hole that the head goes into) ...
    (alt.home.repair)