Re: WinXP installation impossible with Asus K8V SE Deluxe and SATA drive ?

pcbutts1 wrote:
> Motorola 68K.

Update and use the altair 8800, 2 MHz Intel 8080 with 256 bytes standard RAM
http://www.syssrc.com/html/museum/html/altair.html
>
>
>
> zara wrote:
>> "pcbutts1" <pcbuttshead1@xxxxxxxxxx> wrote in message
>> news:1125329875.b32962f05e996c451f647b8e87d0d34c@xxxxxxxxxxx
>>> AMD chips are shit.
>>
>> What chip do you consider excellent, Maccie?
>>>
>>> --
>>>
>>> "Instead of trying to bash me you should try to learn from me and
>>> archive my posts so you can better help people in the future. If you
>>> don't understand something I post then ask me my email is valid."
>>>
>>> - pcbutts1.@xxxxxxxxxxxxxxxxxxxx
>>> - pcbutts1.@xxxxxxxxxx
>>>
>>>
>>>
>>>
>>> Sebastien C. wrote:
>>>> Hi,
>>>>
>>>> I sent an email to the Asus support but no reply yet, so maybe
>>>> someone here knows what the trick is..
>>>>
>>>> I just assembled a PC for a friend with Asus K8V SE Deluxe (Bios
>>>> 1008.002), Sempron 3000+, 512 Mb Kingston and a Maxtor 80 Gb 8 Mb
>>>> SATA drive.
>>>>
>>>> While installing XP, it needs me to specify the SATA driver
>>>> pressing F6. That's working good, the disk is recognized, and i
>>>> can format it. But just after this, XP asks again for the driver
>>>> telling it can't find the ulsata.sys file... the floppy disk is
>>>> good, i tried another one, the floppy drive is good (i also tried
>>>> another one). I tried to change the bios settings using the RAID
>>>> fonctionnality to make an array with only one disk. So i use the
>>>> corresponding driver while pressing F6. It works the same (format
>>>> possible, but its go on asking the driver while it's present in
>>>> the drive). I tried with Bios 1008.002 and 1007, no difference...
>>>>
>>>> I tried with the WinXP CD from a friend (with no service pack) and
>>>> just after specifying the correct driver with the F6 button, it
>>>> doesn't see any drive, so i can't format and install XP..
>>>>
>>>> Is there a working driver for the SATA controler for this mainboard
>>>> ? Or does it mean, we absolutely need to use a XP SP2 CD to make
>>>> the installation ?
>>>>
>>>> PS : the system was freezing randomly before i upgrade to bios
>>>> 1008.002, now it's stable
>>>>
>>>> PS2: Maxtor drive successfuly passed the test from Maxtor utility
>>>>
>>>> PS3: RAM was also tested successfully with Memtest86
>>>>
>>>> Thanks
>>>>
>>>> Seb


























































.

Relevant Pages