Re: switching front forks...
Stem center to center. Or are you meaning the tube. With the tube I
wouldn't go under 6 inches. Tube thu frame with headset and stem. The
tube should be a few mm below the top of the stem without the cap on.
- Re: New Bike - Do I need to adjust the headset?
... I have had my bike, a Marin Muirwoods hybrid, for just over a week now ... think this is called the "headset" according to the pictures on ... the tube is the forks' steer tube aka "steerer". ... spacers can be moved from below the stem to on top of the ...
- Re: Effect of 1cm frame size difference
... frame recommendations at these two sites: ... top tube was recommended. ... Since 100mm is the shortest stem I would want to use, ...
- Re: indirect tire pressure gauge?
... attach it semi-permanently to the added valve stem. ... Moving a valve stem on a tube is not a major challenge. ... Despite assorted reasons why it won't work, a semi-permanent pressure ...
- Re: Child seats front mount, headset load
... Seems to me like the headset and stem were never intended for this kind of extra load, though I guess it's not a big deal if the headset bearings need to be replaced more often. ... I tried riding the bike with the seat installed and it was pretty cramped. ... But aren't most of those seats supported by the top tube, or by the headset tube and seat tube or seatpost? ...
- Re: Presta repair?
... placed as a patch on the latex tube. ... and it costs less than a new tube. ... A spare tube is far larger than a tubular tire Presta valve and costs ... considering that the stem is a left-over from an old dead ...