Re: Squareness measuring device

On Oct 5, 10:02 pm, Gunner Asch <gun...@xxxxxxxxxxxxxxxxxxxx> wrote:
On Mon, 05 Oct 2009 21:45:03 -0700, BottleBob <bottl...@xxxxxxxxxxxxx>
wrote:





StarDust wrote:

tolerance in your original post was 0.005 micron.  Did you mean 5
micron?

Yep!!!!
Never said .005 micron!

JS:

   Here is a copy of the relevant part of your original post.

=========================================================

   I'm looking for inexpensive measuring instrument to measure a few
8x10x1 inch flat parts for squareness within ± .005 micron mm or less.
Part is made out of glass, fragile!!!

=========================================================

Ayup...he most certainly stated .005 micron.

Now if he stops and thinks..then apologizes for his utter
buffoonery..perhaps we can get to solving his original problem.

Gunner Asch

STOP neat picking and START using your head!
JS
.

Relevant Pages

  • Re: Quartz heater: Asorption length of short wavelength IR in air?
    ... It is an old building and the glass looks anything but special, so I assume it is not polished plate, not glare reducing, and it is certainly not colored. ... Right around 2.5 micron, transmission transitions from 45% to below 25%. ... Assuming that absorbed IR robs energy from what would otherwise be transmitted an reflected, let's knock 5-10% off the reflected energy. ... For double-layer windows, we can assume the absorbed energy is converted to heat at the window and lost to the outside immediately through conduction, since there is such a temperature gradient to the outside. ...
    (sci.optics)
  • Re: Precision squareness measurement...
    ... 8x10x1 inch flat parts for squareness ... within +/- .005 micron mm or less. ... Part is made out of glass, ...
    (alt.machines.cnc)
  • 75 um protective cover glass on film
    ... I'm trying to cover a photographic film target with a 75 micron ... protective cover, either glass, fused silica or whatever. ... Does anyone know of any technique or company to make 75 micron glass ...
    (sci.optics)
  • Re: Squareness measuring device
    ... Never said .005 micron! ... Part is made out of glass, ... STOP neat picking and START using your head! ...
    (alt.machines.cnc)
  • Re: FOWLER TRIMOS VERTICAL 32"/800mm DIGITAL HEIGHT GAGE
    ... It can do squareness measurement, by tracing part up and down!. ... It has a 1 micron resolution! ... good for checking a 50 micron tolerance on a short length ... shitload more money than a cheesy height gage from Freddy Fowler. ...
    (alt.machines.cnc)
Loading