Re: Survey - Micrometer Ratchet


"BottleBob" <bottlbob@xxxxxxxxxxxxx> wrote in message
news:NcWdnVdOBN2Dws3UnZ2dnUVZ_rvinZ2d@xxxxxxxxxxxxxxxx
To All:

Just curious, do you use the micrometer ratchet (or friction thimble)
to measure your parts?

[ X] Always.

[ ] Often.

[ ] 50/50

[ ] Seldom.

[ ] Never.

Comments:


I use the ratchet because it fits in my cordless drill chuck.

Fred


.

Relevant Pages

  • Re: Survey - Micrometer Ratchet
    ... BottleBob wrote: ... do you use the micrometer ratchet (or friction thimble) ... Seldom. ...
    (alt.machines.cnc)
  • Re: Survey - Micrometer Ratchet
    ... do you use the micrometer ratchet (or friction thimble) ... Seldom. ... Bill Smith ...
    (alt.machines.cnc)
  • Re: Survey - Micrometer Ratchet
    ... do you use the micrometer ratchet (or friction thimble) ... Seldom. ... mike by using a gage block or pin that's the same or near to the same size ...
    (alt.machines.cnc)
  • Re: Survey - Micrometer Ratchet
    ... do you use the micrometer ratchet ... Seldom. ... I always use my friction thimble so the pressure applied is always the ... Gage blocks always seem to be the same size when I check them. ...
    (alt.machines.cnc)
  • Re: Survey - Micrometer Ratchet
    ... do you use the micrometer ratchet (or friction thimble) to measure your parts? ... Seldom. ... I use the ratchet because it fits in my cordless drill chuck. ...
    (alt.machines.cnc)