Re: Replaced the hard disk drives with compact flash card readers on my CNCs.
Been running my Omniturn from a Kodak CF card for 2 years
now. Didn't seen the floppy bay CF adapters, mine uses an
internal IDE adapter card, but I'm going to add the floppy
adapter soon and set it up to read programs off that drive,
using the Kodak card for the OS and Omni software.
Sure is slick!
Jon
.
Relevant Pages
- Re: HDdriver and CF card drive problem
... I don't think it's the cable, but the adapter is indeed acting ... The card reader uses a 25 pin connector, so to connect it to the 50 ... The other end of the cable from the ICD Link II goes to the Mega STe ... plan is to install some sort of IDE interface and use a Compact Flash ...
(comp.sys.atari.st) - Re: PCMCIA Adapter for SD cards: Which one, and how?
... With a SD to CF adapter, I can now read a card faster than via USB 1.1, ... Going the route SD to CF adapter in a CF to PCMCIA adapter did not work ... Bus 1: ...
(comp.os.os2.setup.storage) - Re: IBM ps2 Micro Channel Soundblaster
... > Wireless ethernet via the PCMCIA Adapter/A comes to mind,;). ... that Olicom card is really an awful design. ... Can you tell my selection of PCMCIA cards is not the best? ... > the same modification, ie, the ability to find the adapter. ...
(comp.sys.ibm.ps2.hardware) - Re: Music & Power Questions
... If you want to go overboard you can buy a smart caddy for a laptop HDD (mine ... has a nokia battery good for 4 hours of read/write), that way you can get an ... app like card export for your PDA and need only have a 1-2 gig card. ... Bev already helped with the power adapter and he has said before about ...
(microsoft.public.pocketpc) - Re: Accessing a TV adapter via my network
... Unless they've changed recently, this card should work. ... wirelessly to my desktop then I could access the TV adapter from my ... I run debian on a couple machines with old 4.3GB drives, ... getting IO bound on the recording machine. ...
(Debian-User) |
|
