Re: Memory Upgrade
On 11 Mar 2008 06:13:37 GMT, D Murphy <spamto154@xxxxxxxxxxx> wrote:
I still use the DOS version of Metcut for speeds and feeds.
Or you could use a CAD/CAM system that uses the database <G>.
- Re: Memory Upgrade
... I still use the DOS version of Metcut for speeds and feeds. ... Or you could use a CAD/CAM system that uses the database. ... Screw that throw 20 horses and a 1/16 endmill and 4500 rpm max into the mix ...
- www.CeBeans.com - new program listings - Dec 1 2008
... This program is a massive database of 999 Low Carb recipes. ... This program is database of the top 100 news RSS feeds with a built in RSS ... hit it and 100 bouns and next round when you knock it off. ...
- Re: anyone converted a Sherline / desktop lathe/mill to CNC ?
... was around $275 when I got it) and then bought SheetCam seperately. ... In CNC there is the ... If you get your speeds and feeds wrong, ...
- Re: Feed and spindle speeds for milling aluminum and brass
... I don't have the feed speeds and spindle speed quite right. ... and have been running the spindle at 4000 RPM ... alloy 6061 aluminum with 1/32" passes. ... speeds and feeds and depth of cut would not make the tool chatter ...
- Re: What is the best speeds and feeds reference?
... Even the best references are a starting point. ... I want to write a calculator to figure out the best speeds and feeds ... Also websites disagree pretty wildly on recommended SFM speeds. ...