Re: Thread milling on a lathe?


"PrecisioNmachinisT" <precisionmachinist@xxxxxxxxxxx> wrote in message
news:J6-dnQS_b7ARSLXanZ2dnUVZ_uyinZ2d@xxxxxxxxxxxxxxxxxx

<disciplealan@xxxxxxxxx> wrote in message
news:1193855906.748140.153650@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Is it possible to use a thread mill to cut OD threads on a lathe with
a actual "c" axis for the spindle, and live tooling.
sounds crazy but at this point I'll try anything to speed up this
inconel 718 job.
Alan


Use a gometric chaser.


Correction : "Geometric"

--


.

Relevant Pages

  • Re: Thread milling on a lathe?
    ... a actual "c" axis for the spindle, and live tooling. ... sounds crazy but at this point I'll try anything to speed up this ...
    (alt.machines.cnc)
  • Re: Thread milling on a lathe?
    ... a actual "c" axis for the spindle, and live tooling. ... sounds crazy but at this point I'll try anything to speed up this ...
    (alt.machines.cnc)
  • Re: Thread milling on a lathe?
    ... a actual "c" axis for the spindle, and live tooling. ... sounds crazy but at this point I'll try anything to speed up this ...
    (alt.machines.cnc)
  • Re: Thread milling on a lathe?
    ... a actual "c" axis for the spindle, and live tooling. ... sounds crazy but at this point I'll try anything to speed up this ... inconel 718 job. ...
    (alt.machines.cnc)
  • Re: Thread milling on a lathe?
    ... a actual "c" axis for the spindle, and live tooling. ... sounds crazy but at this point I'll try anything to speed up this ...
    (alt.machines.cnc)