Re: Equidistant Calculation

On Sun, 03 Jun 2007 11:15:25 -0700, brewertr@xxxxxxx wrote:

On Sun, 03 Jun 2007 10:28:44 -0700, brewertr@xxxxxxx wrote:

where your start
XY and end XY are wrong even for your stated "Optional" diameter.

Correction, should be XZ not XY.

XY plane perhaps .. but I'll bet YOU program manually in the machine system
.....
--
Cliff
.

Relevant Pages

  • Re: Equidistant Calculation
    ... XY and end XY are wrong even for your stated "Optional" diameter. ... Correction, ... XY plane perhaps .. ... but I'll bet YOU program manually in the machine system ...
    (alt.machines.cnc)
  • Re: Equidistant Calculation
    ... XY and end XY are wrong even for your stated "Optional" diameter. ... Correction, ... XY plane perhaps .. ... but I'll bet YOU program manually in the machine system ...
    (alt.machines.cnc)
  • Re: How large a zone can orthoK go up to? 7mm? larger?
    ... treatment zone. ... One generally has only 50 microns of tissue to play ... with, so figure out the maximum depth is 50 microns, the diameter is 7 ... How much correction in diopters can result? ...
    (sci.med.vision)
  • Re: Mirage optical illusion?
    ... one has a central hole about 1/4 the OD of the ... the plane of the hole in the upper bowl, ... The 22" diameter version for museums, etc, is $1500 from Arbor ...
    (sci.optics)
  • An idle question...
    ... distributed in a plane with desnity N and diameter D, ... that the mean free path is: ...
    (sci.physics)
Loading