Re: G41, some Qs

From: Cliff <Clhuprich@xxxxxxx>
Date: Fri, 04 May 2007 03:59:51 -0400

On Thu, 12 Apr 2007 16:01:49 GMT, John <John@xxxxxxxxxxx> wrote:

Comp distance should always be greater than the value in the comp
register. On small intricate work you may want to comp in on both X & Y
as there is the possibility that the first actual cut on either axis
could be too short to fully apply comp.

Are you programming in the machine coordinate system like jb
probaby does <GAK>?
Thought question was about tool diameter/radius comp ... but
even then I don't recall if PV is using WSP or centerline programming ....
but do hope he's not using TomB Programming.
--
Cliff
.

Follow-Ups:
- Re: G41, some Qs
  - From: brewertr

Prev by Date: Re: G41, some Qs
Next by Date: Re: G41, some Qs
Previous by thread: Re: G41, some Qs
Next by thread: Re: G41, some Qs
Index(es):
- Date
- Thread

Relevant Pages

COM, .tli problem
... programming, the libraries it came with an OEM instrument that I am ... My software uses a nanopositioner that my comp commutates with through ... exception which leads to this portion of a .tli file located in the / ...
(microsoft.public.vc.language)
Re: CUTTER COMP QUESTIONS
... I always use part profile programming for wire ed. ... edm is always radius on all the machines I've seen. ... Some of the machines I have run could switch diameter to ... Some could only comp one direction eg; ...
(alt.machines.cnc)
Re: G41, some Qs
... On small intricate work you may want to comp in on both X & Y ... even then I don't recall if PV is using WSP or centerline programming .... ... should always be greater than the value in the comp register". ... Yep, and your still Clueless-Cliff, rule still applies. ...
(alt.machines.cnc)
Re: G41, some Qs
... even then I don't recall if PV is using WSP or centerline programming .... ... Doesn't matter what programming method is ... should always be greater than the value in the comp register". ... Yep, and your still Clueless-Cliff, rule still applies. ...
(alt.machines.cnc)
Re: G41, some Qs
... even then I don't recall if PV is using WSP or centerline programming .... ... Doesn't matter what programming method is ... should always be greater than the value in the comp register". ... Yep, and your still Clueless-Cliff, rule still applies. ...
(alt.machines.cnc)