Re: Pure Nickel machining question

From: Cliff <Clhuprich@xxxxxxx>
Date: Thu, 22 Jun 2006 18:03:12 -0400

On Thu, 22 Jun 2006 16:17:34 GMT, clay <a_design@xxxxxxxxxxx> wrote:

Anyone have some Speed & feed advice for milling Nickel 200? (Pure
Nickel) I am milling pockets with a Ø.1875 .03R bull nose end mill, and
getting a lot of chatter type tool marks. Have tried Cobalt & Micrograin
carbide tools. Finish DOC is around .002", side finish step is .020"
Cobalt RPM is 1000rpm, carbide is around 2500rpm.

Check the archives & the MDH ...
--
Cliff
.

References:
- Pure Nickel machining question
  - From: clay

Prev by Date: Re: Copper beryllium.
Next by Date: Re: Cliffy....You may want to read this...
Previous by thread: Pure Nickel machining question
Next by thread: Re: Pure Nickel machining question
Index(es):
- Date
- Thread