Re: Question about pulley ratios for Taig 2019

In <1149014998.707535.103480@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> The Eternal
Squire wrote:
All,

I haven't been able to find any documentation on how to loop the belt
over the motor and spindle pulley grooves to achieve a given RPM. I
understand that I need to loop over the smallest groove on the motor
and the largest groove over the spindle to get 10,000 RPM. Anyone
have documentation on what the other speeds are and how to get them.

Thanks in advance,

The Eternal Squire


http://www.gizmology.net/pulleysbelts.htm

hth
Bart
.

Relevant Pages

  • Question about pulley ratios for Taig 2019
    ... over the motor and spindle pulley grooves to achieve a given RPM. ... and the largest groove over the spindle to get 10,000 RPM. ...
    (alt.machines.cnc)
  • Re: Maintaining The Groove
    ... say bass and guitar or guitar and keys for example, ... that does not allow for sound adjustment. ... pushing the groove and then loses the sound of the click in the cans ... try getting them to play to a sampled drum loop ...
    (rec.audio.pro)
  • Re: Is this too much noise for a budget turntable..
    ... the noise only occurs when the motor is on and the needle is either ... in the groove, or outside the groove and not moving tangentially/skating. ... the motor is hanging freely on its elastic bands. ...
    (uk.rec.audio)
  • Re: Is this too much noise for a budget turntable..
    ... the noise only occurs when the motor is on and the needle is either ... in the groove, or outside the groove and not moving tangentially/skating. ... the motor is hanging freely on its elastic bands. ...
    (uk.rec.audio)
  • Re: Is this too much noise for a budget turntable..
    ... Any muting circuit at start or end of disc would remove the out of ... groove surface noise too... ... I don't know what materials are used, but it could either be motor ... Audio Misc http://www.st-and.demon.co.uk/AudioMisc/index.html ...
    (uk.rec.audio)