Re: Back Boring Tool?


"ff" <ffredd@xxxxxxxxxxx> wrote in message
news:QQBXf.44001$_S7.10122@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
I have a part to make with a counterbore which is not accessible directly.
So it will be a backboring operation. I looked at the Flipcut tool from
Cogsdill but the smallest size is for a .281 hole. I would like something
like this:

http://www.vermontindexable.com/backspott.html

but those are custom made (read: expensive for one tool and leadtime).
Just need one or two tools, right away. Oh yeah, must be able to slip
through a .250 hole.

Any ideas, suggestions welcome.

Fred


http://www.erixtool.com/erix1.html


.

Relevant Pages

  • Back Boring Tool?
    ... I have a part to make with a counterbore which is not accessible directly. ... So it will be a backboring operation. ... I looked at the Flipcut tool from Cogsdill but the smallest size is for a .281 hole. ...
    (alt.machines.cnc)
  • Re: Back Boring Tool?
    ... So it will be a backboring operation. ... I looked at the Flipcut tool from Cogsdill but the smallest size is for a .281 hole. ... Make a shank long enough to reach from the spindle through the hole and into the pilot hole of the counter bore. ...
    (alt.machines.cnc)
  • Re: Back Boring Tool?
    ... Michael Rainey wrote: ... I looked at the Flipcut tool from Cogsdill but the smallest size is for a .281 hole. ...
    (alt.machines.cnc)
  • Re: Back Boring Tool?
    ... I looked at the Flipcut tool from ... Cogsdill but the smallest size is for a .281 hole. ... A much cruder way would be to use a counter bore. ...
    (alt.machines.cnc)