Re: Oilant vis Coolant

Relevant Pages

• Re: Oilant vis Coolant
  ... to check his speeds & feeds and also check to see that he is using the ... correct carbide inserts and coatings........ ... Anything to get rid of his business .... ... This might provoke a business ethics discussion ...
  (alt.machines.cnc)
• Re: anyone converted a Sherline / desktop lathe/mill to CNC ?
  ... was around $275 when I got it) and then bought SheetCam seperately. ... In CNC there is the ... If you get your speeds and feeds wrong, ...
  (comp.robotics.misc)
• Re: Feed and spindle speeds for milling aluminum and brass
  ... I don't have the feed speeds and spindle speed quite right. ... and have been running the spindle at 4000 RPM ... alloy 6061 aluminum with 1/32" passes. ... speeds and feeds and depth of cut would not make the tool chatter ...
  (alt.machines.cnc)
• Re: Feed and Speeds...again...
  ... It even changes speed and feed if you change depth or width of cut. ... I know I tend to stay on a conservative side of feeds and speeds so I will ... Has carbide endmills, but it needs ...
  (alt.machines.cnc)
• Re: Feed and Speeds...again...
  ... It even changes speed and feed if you change depth or width of cut. ... I know I tend to stay on a conservative side of feeds and speeds so I will ... Has carbide endmills, but it needs ...
  (alt.machines.cnc)