Re: Fanuc alarm help

Tero Kaarlela <tero.kaarlela@xxxxxxxxxx> wrote in
news:43D892D4.3000106@xxxxxxxxxx:

> D Murphy wrote:
>> Tero Kaarlela <turo.kaarlela@xxxxxxxxxxx> wrote in
>> news:43d7dba8$0$25717 $9b536df3@xxxxxxxxxx:
>>
>>
>>>Some machine tool builders include
>>>diagnostic pages of this manual to their own manuals, but I have
>>>never seen that "Fanuc Ac spindle maintenance manual" is included
>>>completely with the machine.
>>>
>>
>>
>> Our machines come with two complete sets of every manual. Spindle and
>> servo maintenance manuals included. Pretty short sighted savings by
>> not including them. If one person has to field a couple of service
>> calls that otherwise wouldn't have been made, then the savings are
>> gone. It costs maybe $600.00 to include two sets. Plus the service
>> techs don't have to lug around 50 lbs of manuals.
>
>
> Do you have extra spindle maintenance manual for sale? We have
> five
> machines with Fanuc AC spindle but zero copies of this manual. And
> sometimes we have had probs with spindle orientation. Without this
> manual troubleshooting is like shooting in the dark.
>

I pitched my 5,6, and 10/11/12 manuals a while back. There is a remote
chance there's a 10/11/12 vintage one kicking around the office. Oh, you
said AC so it's 10 control or newer. I probably have one if it's from a 0
on up to 18i.

What's the control? Prolly need to know the drive and motor too.

--

Dan

.

Relevant Pages

  • Re: Rebuilding Dumore toolpost grinders (was: Re: FA: Dumore Tool Post Grinder Inserts, ... )
    ... small bearings already specified for 30,000 rpm, unless one's air supply ... while the spindle has shafts coming out at both ends. ... allows one to change the business end without disassembling the grinder. ... trouble would it have been to scan and post the old manuals? ...
    (rec.crafts.metalworking)
  • Re: CNC Mill available- So.California
    ... Multiple Spindle Drills: http://www.Multi-Drill.com ... Axis CNC ... Manuals included in sale: ... Hitachi-Seiki VA-35 Programming Manual ...
    (rec.crafts.metalworking)
  • Re: Dumore TP Grinder (was: Re: FA: Dumore Tool Post Grinder Inserts)
    ... DO NOT EXCEED WHEEL SPEED RECOMMENDATIONS." ... Kinda fun looking at these old manuals .. ... get confirmation that the spindle thread was originally 1/4-32. ... Mine drives a 2.5" wheel ok. ...
    (rec.crafts.metalworking)
  • Re: Fanuc alarm help
    ... diagnostic pages of this manual to their own manuals, but I have never seen that "Fanuc Ac spindle maintenance manual" is included completely with the machine. ... Spindle and servo maintenance manuals included. ...
    (alt.machines.cnc)
  • 6328 Grinie St
    ... Everybody spare french lips, do you rain them? ... Jadallah won't control any ... May did Carolyn point away from all the manuals? ... bows unless Roxanna will forwards secure afterwards. ...
    (sci.crypt)