Re: Cutting heat effected zone on aluminum


"Polymer Man" <ncarothers@xxxxxxxxxx> wrote in message
news:1137707708.386130.82660@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Dixon
>
> I was using the ER4043. I will pick up the 5356 next time I get gas.
> Great info, Thanks
>
Note That only the weld will machine better, not the HA, although that may
at least help a bit.
-Dennis


.

Relevant Pages

  • Re: What should I budget to start TIG welding.
    ... I have learned that TIG welding can be done with my StickMate. ... TIG torch. ... but you won't be able to weld for very long or very heavy stuff, ... It also turns on the gas. ...
    (sci.engr.joining.welding)
  • Re: What should I budget to start TIG welding.
    ... I have learned that TIG welding can be done with my StickMate. ... TIG torch. ... but you won't be able to weld for very long or very heavy stuff, ... It also turns on the gas. ...
    (sci.engr.joining.welding)
  • Re: Welding - its not just for breakfast anymore
    ... the truck to weld gate hardware and erect wrought iron fence panels. ... And you get much nicer results with gas shielding, ... Straight CO2 is cheap for steel work, ... And watch the Duty Cycle ratings, the better welders have 50% to ...
    (rec.crafts.metalworking)
  • Re: Mig Welder
    ... I have a Lincoln ac/dc stick welder. ... it doenst mean a not so pretty weld aint ... I guess id get a large MIG welder..300 amps or so and then have the ... I have noticed that the gas is a ...
    (sci.engr.joining.welding)
  • Re: Possibly daft new TIG welder question
    ... maybe on some scrap alloy? ... typitcal practice is to ball the tungsten on copper, ... The weld on fittings are about a 1/4 inch ... to ensure gas coverage until the tungsten cools. ...
    (sci.engr.joining.welding)