Re: Hex shaft adaptors
- From: Will <Will@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Tue, 29 Nov 2005 21:30:04 GMT
On Mon, 28 Nov 2005 20:15:43 +0000 (UTC), "Douglas Simmonds"
<douglNOSPas.simNOSPmonds@xxxxxxxxxxxxxx> wrote:
>Hi guys,
>
>Thanks for these suggestions. The ball screw ends are 10mm diameter and the
>stepper motor is 5mm Hex (face to face). It seems weird but I can't find an
>adaptor to fit the 5mm shaft. Once I get any kind of adaptor I can get a
>suitable oldham or similar connector to attach to the ballscrew shaft.
>
>Any good online shops where such things might be stocked.
>
>Thanks again folks,
>
>Doug
>
I would try
Stock Drive Products https://sdp-si.com/eStore/
but you will have to call, the closest on-line item is a .253 flat to
flat hex sleeve with a .5 od
or
W.M. Berg Inc.
499 Ocean Ave.
East Rockaway, NY 11518
Tel: 800/232-2374
Fax: 800/455-2374
HTH
Will
.
- Follow-Ups:
- Re: Hex shaft adaptors
- From: Will
- Re: Hex shaft adaptors
- References:
- Hex shaft adaptors
- From: Douglas Simmonds
- Re: Hex shaft adaptors
- From: Douglas Simmonds
- Hex shaft adaptors
- Prev by Date: Re: Finding Employees
- Next by Date: Re: Opinons Please
- Previous by thread: Re: Hex shaft adaptors
- Next by thread: Re: Hex shaft adaptors
- Index(es):
Relevant Pages
|
