Re: Drilling Speed Chart - Mild Steel

From: Cliff <Clhuprich@xxxxxxx>
Date: Thu, 03 Nov 2005 16:50:58 -0500

On Thu, 03 Nov 2005 19:14:55 GMT, "Joe AutoDrill" <bob@xxxxxxxxxxxxxx>
wrote:

> but someone actually convinced my customer he needs a
>tremendous amount of HP for a simple hole

Don't they know what torque is?
--
Cliff
.

Follow-Ups:
- Re: Drilling Speed Chart - Mild Steel
  - From: clutch
- Re: Drilling Speed Chart - Mild Steel
  - From: Joe AutoDrill

References:
- Drilling Speed Chart - Mild Steel
  - From: Joe AutoDrill

Prev by Date: Re: Tapping Nylon
Next by Date: Re: Tapping Nylon
Previous by thread: Re: Drilling Speed Chart - Mild Steel
Next by thread: Re: Drilling Speed Chart - Mild Steel
Index(es):
- Date
- Thread

Relevant Pages

Re: Drilling Speed Chart - Mild Steel
... Cliff wrote: ... >> but someone actually convinced my customer he needs a ... >>tremendous amount of HP for a simple hole ...
(alt.machines.cnc)
Re: Clarification on Broaching Question!
... Cliff wrote: ... >>Depth of cut at a 50 IPM feedrate. ... > And you wrote "HP (or torque)". ...
(alt.machines.cnc)
Re: Interpolating a blind hole for tapping
... will mill/drill hole .650 deep. ... tool changes and dispense with a pilot drill, ... break the chips into non-letal springy's. ... Cliff. ...
(alt.machines.cnc)
Re: Interpolating a blind hole for tapping
... will mill/drill hole .650 deep. ... tool changes and dispense with a pilot drill, ... will probably create long stringy chips. ... Cliff. ...
(alt.machines.cnc)
Re: Interpolating a blind hole for tapping
... will mill/drill hole .650 deep. ... tool changes and dispense with a pilot drill, ... break the chips into non-letal springy's. ... Cliff. ...
(alt.machines.cnc)