Re: CORRECTION: Bridgeport Series1 Boss4 Powerup
- From: "GuyInTheShop" <someone@xxxxxxxxxxxxx>
- Date: Sat, 01 Oct 2005 14:23:27 GMT
I got all three axes to move, increment, jog, etc. Thanks for the
suggestions I am sure the the help you guys gave to me saved me a lot of
debug time, much appreciated.
I thing remains now, no spindle powerup. I check lube bow and air pres is
fine, so something else thru the panel?
I saw the machine running and making parts the day before the relocation.
Something on my end.
Thanks again
"GuyInTheShop" <someone@xxxxxxxxxxxxx> wrote in message
news:bOm_e.779$Y_5.620@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Anyone tell me the procedure to verify the servo(s) operation using the
> MDI
> panel?
> Powering up the machine it does a self-check, then diplay reads zeros,
> then
> I should be able to do a sequence on the MDI to fast travel the table in x
> and y. No computer on the serial cable yet.
> Machine was disconected and relocated to our shop.
>
.
- Prev by Date: Re: Lack of Pirates cause global warming.
- Next by Date: Re: Haas erase all
- Previous by thread: Re: Lack of Pirates cause global warming.
- Next by thread: Re: OT - Hybrid Cars Gas Mileage Calculator [was:] Global Warming Revisited
- Index(es):
Relevant Pages
|
