Re: Screw Mastercam x
- From: "MM" <markm@xxxxxxxxxx>
- Date: Sat, 27 Aug 2005 00:06:00 GMT
Vinny,
> Tell me more...
> In his model I determined .124 is the smallest size fit, I wonder what
> analyze surface curviture will give me????
> If thAt works it will be a great time saver on some files.
Don't have X yet so I'll tell ya how to do it in 9.1
>From main menu select "analyze"-"surfaces"-"curvature"
If you only want to analyze specific surfaces, select "surfaces" and click
on the ones you want. Select "done" (if you don't select specific surfaces,
it meshes all the surfaces in the model)
Select "facet size", If the model has relativly small radii, set value to 1
or 2.
Select "curv type", it should default to "min" (4) which is what you want.
Click "do it"
minimum radius will display at lower left
regards
Mark
.
- Follow-Ups:
- Re: Screw Mastercam x
- From: Mitch
- Re: Screw Mastercam x
- References:
- Screw Mastercam x
- From: vinny
- Re: Screw Mastercam x
- From: MM
- Re: Screw Mastercam x
- From: vinnyatwork
- Re: Screw Mastercam x
- From: Mitch
- Re: Screw Mastercam x
- From: vinnyatwork
- Re: Screw Mastercam x
- From: Cliff
- Re: Screw Mastercam x
- From: vinny
- Re: Screw Mastercam x
- From: MM
- Re: Screw Mastercam x
- From: vinny
- Screw Mastercam x
- Prev by Date: Re: Newbie question of the day
- Next by Date: Re: Motor Contactors, AC as well as DC?
- Previous by thread: Re: Screw Mastercam x
- Next by thread: Re: Screw Mastercam x
- Index(es):
Relevant Pages
|