Re: Tool change macro
"Proctologically Violated©®" wrote:
> I do know when I hadn't made it the shop for a while, a tool was left in the
> spindle, and boy, you saw immediately that that was a bad idea.
> But mebbe overnight is not such a big deal.
I haven't noticed any corrosion from leaving toolholders in the
spindle. But then the machines don't stay unused for any extended
periods of time. Perhaps it's a geographical thing, are you near the
ocean where salt spray might be a factor?
> Yeah, ahm dyin to see what happens w/ T0 M6 as well!!
Well get downstairs and check it out. I'm really curious.
- Re: grinder on lathe bed?
... (If I'm into some spindle turning I would prbably not be needing ... I'd avoid it for the same reason that I don't like the shop made grinding disks ... that fit either hand wheel or between the spindle and chuck.. ... either metal shavings or sparks around the lathe.. ...
- Re: Atheism the fastest growing religious identification
... did you ever get anywhere with the CNC machine you were ... It's sitting in the RV storage portion of my shop, ... By the way, it's a HAAS TM-1, built in 2004. ... would be difficult because of my Erickson QC 30 spindle nut system. ...
- Re: New to vertical milling
... context, however we are discussing the use on a Centec 2B in the home ... shop with as Mark rightly pointed out a 2MT spindle. ...
- Re: Ping Bryce
... shop implementing CNC chucker machines, ... spindle often directly relates to a faster cycle time, ...
- Re: Survey: Do You Leave a Toolholder in the Spindle Overnight?
... >>The rule in my shop has been not tool in the spindle don't blow on the ... > $30 plus shipping is rather expensive for an "economy" taper wiper. ... You can wad up a paper towel, ... Owning a shop is kinda like burger King, you can have it your way. ...